HI,
this patch serie update the rm9200 support with
- USB OHCI
- USB Device (USB serial)
- leds
and add the basic support for the sam9x5 series
NB: the hardware ecc PMECC is not yet supported
please pull
The following changes since commit 79ea2bb5284cc4b5b28a3fa3fee6ede7304e4179:
at91rm9200ek: adjust kernel partition to be able to flash mainline kernel (2012-03-30 12:51:54 +0800)
are available in the git repository at:
git://git.jcrosoft.org/barebox.git at91
for you to fetch changes up to bfd880f58915ae8098a6a0603e1003efc9d6feae:
AT91: at91sam9x5: add chip and board file (2012-03-30 13:00:23 +0800)
----------------------------------------------------------------
Jean-Christophe PLAGNIOL-VILLARD (9):
at91rm9200ek: add ohci support
at91rm9200ek: add leds support
at91rm9200ek: add usb serial support
at91rm9200ek: update defconfig
atmel_nand: add on_flash_btt option to enable bbt option
ARM: at91: add sam9x5 series CPU definition and cpu_is_xxx macro
ARM: at91: allow to pass the interface id to at91_add_device_eth
ARM: at91/pio: add new PIO3 features
AT91: at91sam9x5: add chip and board file
arch/arm/Makefile | 1 +
arch/arm/boards/at91rm9200ek/env/bin/init_board | 11 +
arch/arm/boards/at91rm9200ek/init.c | 65 ++++-
arch/arm/boards/at91sam9260ek/init.c | 2 +-
arch/arm/boards/at91sam9263ek/init.c | 2 +-
arch/arm/boards/at91sam9m10g45ek/init.c | 2 +-
arch/arm/boards/at91sam9x5ek/Makefile | 1 +
arch/arm/boards/at91sam9x5ek/config.h | 6 +
arch/arm/boards/at91sam9x5ek/env/config | 38 +++
arch/arm/boards/at91sam9x5ek/init.c | 167 +++++++++++
arch/arm/boards/dss11/init.c | 2 +-
arch/arm/boards/mmccpu/init.c | 2 +-
arch/arm/boards/pm9263/init.c | 2 +-
arch/arm/boards/pm9g45/init.c | 2 +-
arch/arm/boards/tny-a926x/init.c | 2 +-
arch/arm/boards/usb-a926x/init.c | 2 +-
arch/arm/configs/at91rm9200ek_defconfig | 18 +-
arch/arm/configs/at91sam9x5ek_defconfig | 69 +++++
arch/arm/mach-at91/Kconfig | 25 ++
arch/arm/mach-at91/Makefile | 1 +
arch/arm/mach-at91/at91rm9200_devices.c | 4 +-
arch/arm/mach-at91/at91sam9260_devices.c | 4 +-
arch/arm/mach-at91/at91sam9263_devices.c | 4 +-
arch/arm/mach-at91/at91sam9g45_devices.c | 4 +-
arch/arm/mach-at91/at91sam9x5.c | 314 ++++++++++++++++++++
arch/arm/mach-at91/at91sam9x5_devices.c | 270 +++++++++++++++++
arch/arm/mach-at91/clock.c | 82 ++++-
arch/arm/mach-at91/gpio.c | 129 ++++++++-
arch/arm/mach-at91/include/mach/at91_pio.h | 25 ++
arch/arm/mach-at91/include/mach/at91_pmc.h | 68 ++++-
arch/arm/mach-at91/include/mach/at91sam9x5.h | 179 +++++++++++
.../arm/mach-at91/include/mach/at91sam9x5_matrix.h | 139 +++++++++
arch/arm/mach-at91/include/mach/board.h | 2 +-
arch/arm/mach-at91/include/mach/cpu.h | 28 ++
arch/arm/mach-at91/include/mach/gpio.h | 6 +
arch/arm/mach-at91/include/mach/hardware.h | 2 +
drivers/mtd/nand/atmel_nand.c | 6 +
37 files changed, 1628 insertions(+), 58 deletions(-)
create mode 100644 arch/arm/boards/at91rm9200ek/env/bin/init_board
create mode 100644 arch/arm/boards/at91sam9x5ek/Makefile
create mode 100644 arch/arm/boards/at91sam9x5ek/config.h
create mode 100644 arch/arm/boards/at91sam9x5ek/env/config
create mode 100644 arch/arm/boards/at91sam9x5ek/init.c
create mode 100644 arch/arm/configs/at91sam9x5ek_defconfig
create mode 100644 arch/arm/mach-at91/at91sam9x5.c
create mode 100644 arch/arm/mach-at91/at91sam9x5_devices.c
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5.h
create mode 100644 arch/arm/mach-at91/include/mach/at91sam9x5_matrix.h
Best Regards,
J.
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
