devices:
`---- imx_serial0
`---- cs0
`---- mem0
`---- 0x00000000-0x1fffffff: /dev/ram0
`---- mem1
`---- 0x00000000-0x1fffffff: /dev/ram1
`---- imx_iim0
`---- 0x00000000-0x0000001f: /dev/imx_iim_bank0
`---- 0x00000000-0x0000001f: /dev/imx_iim_bank1
`---- 0x00000000-0x0000001f: /dev/imx_iim_bank2
`---- 0x00000000-0x0000001f: /dev/imx_iim_bank3
`---- 0x00000000-0x0000001f: /dev/imx_iim_bank4
`---- 0x00000000-0x0000001f: /dev/imx_iim_bank5
`---- 0x00000000-0x0000001f: /dev/imx_iim_bank6
`---- 0x00000000-0x0000001f: /dev/imx_iim_bank7
`---- ramfs0
`---- devfs0
`---- mem2
`---- 0x00000000-0x00001d47: /dev/defaultenv
`---- mem3
`---- 0x00000000-0xfffffffe: /dev/mem
`---- cs1
`---- fec_imx0
`---- miidev0
`---- 0x00000000-0x0000003f: /dev/phy0
`---- eth0
drivers:
imx_serial
ramfs
devfs
imx_iim
fec_imx
miidev
mem
barebox:/ adp
Unknown command 'adp' - try 'help'
barebox:/ addpart
Usage: addpart <device> <part_desc>
Add a partition description to a device.
<device> device being worked on
<part_desc> size1[@offset1](name1)[ro],size2[@offset2](name2)[ro],...
barebox:/ addpart /dev/nand0 256k(barebox)ro,768k(bareboxenv),4M(kernel),-(root)
addpart: No such file or directory
barebox:/
I have an addpart tool as you can see but i cannot create a partition. In the /dev folder is also no /dev/nand0
- - Christian
Von: Alexander Aring <alex.aring@xxxxxxxxxxxxxx>
An: christian.buettner@xxxxxxx
Kopie: Eric Bénard <eric@xxxxxxxxxx>, barebox@xxxxxxxxxxxxxxxxxxx
Datum: 29.03.2012 14:40
Betreff: Re: Re: Create NAND Partition through barebox
Hi,
is there a /dev/nand0 device?
/env/bin/init call "addpart /dev/nand0 $nand_parts" and create these partitions.
Or maybe the command is not available?
Alex
Am 29. März 2012 14:32 schrieb <christian.buettner@xxxxxxx>:
This is my current config:
#!/bin/sh
machine=test
kernel_loc=nand
rootfs_loc=nand
rootfs_type=ubifs
kernel=zImage
rootfs=rootfs
envimage=environ.bin
autoboot_timeout=3
nfsroot="/tools/rootfs/test"
console="console=ttymxc0,115200"
bootargs=${console}
nand_parts="256k(barebox)ro,768k(bareboxenv),4M(kernel),-(root)"
kdev="/dev/nand0.kernel.bb"
rootfs_mtdblock_nand=3
But i see no NAND in devinfo
- - Christian
Von: Eric Bénard <eric@xxxxxxxxxx>
An: barebox@xxxxxxxxxxxxxxxxxxx
Datum: 29.03.2012 14:04
Betreff: Re: Create NAND Partition through barebox
Gesendet von: barebox-bounces@xxxxxxxxxxxxxxxxxxx
Hi,
Le Thu, 29 Mar 2012 13:55:43 +0200,
christian.buettner@xxxxxxx a écrit :
> i need to create a NAND Partition through the barebox prompt to be able to
> flash a kernel image on it.
>
>.../...
>
> I tried using
> $ nand -a /dev/nand0.*
>
> Nothing happens..
> What is wrong?
>
do you have the partition definition in your /env/config file ?
Eric
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
