#!/bin/sh
machine=test
kernel_loc=nand
rootfs_loc=nand
rootfs_type=ubifs
kernel=zImage
rootfs=rootfs
envimage=environ.bin
autoboot_timeout=3
nfsroot="/tools/rootfs/test"
console="console=ttymxc0,115200"
bootargs=${console}
nand_parts="256k(barebox)ro,768k(bareboxenv),4M(kernel),-(root)"
kdev="/dev/nand0.kernel.bb"
rootfs_mtdblock_nand=3
But i see no NAND in devinfo
- - Christian
Von: Eric Bénard <eric@xxxxxxxxxx>
An: barebox@xxxxxxxxxxxxxxxxxxx
Datum: 29.03.2012 14:04
Betreff: Re: Create NAND Partition through barebox
Gesendet von: barebox-bounces@xxxxxxxxxxxxxxxxxxx
Hi,
Le Thu, 29 Mar 2012 13:55:43 +0200,
christian.buettner@xxxxxxx a écrit :
> i need to create a NAND Partition through the barebox prompt to be able to
> flash a kernel image on it.
>
>.../...
>
> I tried using
> $ nand -a /dev/nand0.*
>
> Nothing happens..
> What is wrong?
>
do you have the partition definition in your /env/config file ?
Eric
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
