The following series contains several improvements to the OMAP gpmc
nand driver. The goal was to implement the reading of data in the
omap4 romcode ecc mode, but this series also contains some general
fixes to the driver found along the way.
Sascha
Sascha Hauer (10):
mtd nand omap: use blocknum calculation to where it's used
mtd nand omap: factor out bch correct function
mtd nand omap: factor out hamming correct function
mtd nand omap: call ecc calculate function outside omap_correct_bch
mtd nand omap: fail on bch decode failure
mtd nand omap: use register defines for ecc registers
mtd nand omap: make debugging output more useful
mtd nand omap: factor out an internal __omap_calculate_ecc function
mtd nand omap: add read function for the OMAP4 romcode ecc mode
mtd nand omap: use NAND_OWN_BUFFERS option
drivers/mtd/nand/nand_omap_gpmc.c | 396 +++++++++++++++++++++++++------------
1 files changed, 267 insertions(+), 129 deletions(-)
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
