Pasted wrong link sorry, here is the right one: http://www.omappedia.com/wiki/Minimal-FS_SD_Configuration 2011/10/13 Samuel Stirtzel <s.stirtzel@xxxxxxxxxxxxxx>: > Hi, > currently I try to get a Pandaboard to boot out of Barebox, so far I > got Barebox up and running. > > > For testing purpose I'd like to boot from a SD card, optimal would be > if I could set up the card like the description in the Omappedia > tutorial [1]. > Is there a tutorial how to set up barebox to boot from SD cards? > > > What I already tried: > > In the configuration file from arch/arm/boards/panda/env is the > description for a network boot configuration, > I used this file to start out and wanted to boot from the barebox prompt. > > Barebox is build from my toolchain and i copy the MLO file, the > barebox.bin and the bareboxenv file to the boot partition of the card. > For convenience I currently use a precompiled MLO that has been made > for u-boot thus I just renamed the barebox.bin file to u-boot.bin. > > On startup the following messages were displayed: > - > Texas Instruments X-Loader 1.5.1 (Sep 6 2011 - 13:37:48) > Reading boot sector > Loading u-boot.bin from mmc > > > barebox 2011.10.0 (Oct 13 2011 - 09:45:17) > > Board: Texas Instrument's Panda > PandaBoard Revision: 003 > ehci@ehci0: USB EHCI 1.00 > Malloc space: 0x8d000000 -> 0x8f000000 (size 32 MB) > Stack space : 0x8cff8000 -> 0x8d000000 (size 32 kB) > running /env/bin/init... > not found > - > For me it looks like i forgot to copy a file or something, any advice? > > > Although booting the uImage with bootm looks ok it won't work, the > following message was displayed: > - > Verifying Checksum ... OK > Image Name: Angstrom/2.6.35.7/omap4430-panda > Image Type: ARM Linux Kernel Image (uncompressed) > Data Size: 3688408 Bytes = 3.5 MB > Load Address: 80008000 > Entry Point: 80008000 > OK > > Starting kernel ... > > commandline: <NULL> > arch_number: 2791 > Uncompressing Linux... done, booting the kernel. > - > The screen just stays blank after the last message. > This looks to me like it is (obviously) caused by an incorrect > environment loaded. > > > Help would be appreciated. > > [1] http://www.omappedia.com/wiki/Minimal-FS_SD_flashing (using 2 > partitions, one for boot files and the other for the rootfs) > > -- > Regards > Samuel > -- Regards Samuel _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
