> > I try > > mx27iat# tftp -g -l /proc/self/fd/1 -r zImage_iat_3.0.11_0.02-dbg1 > > 10.0.56.4 | nandwrite -p /dev/mtd4 - > > > > But this doesn't work. Gives some output, from which: > > open input file: No such file or directory The same command without > > the pipe at the end works (output to stdout) > > Try passing the data via a named pipe: > > mkfifo nand_pipe > tftp -g -l nand_pipe -r zImage 10.0.56.4 & nandwrite -p /dev/mtd4 nand_pipe > Doesn't work: mx27iat# mkfifo nand_pipe mx27iat# tftp -g -l nand_pipe -r output 10.56.114 | nandwrite -p /dev/mtd4 nand_pipe tftp: using blksize 512MTD_open MTD_ioctl using server '10.0.56.114:69', rMTD_ioctl emote_file 'output', local_file MTD_write 'nand_pipe' sending 15 bytes 00 01 6f 75 74 70 75 74 00 6f 63 MTD_close 74 65 74 00 Writing data to block 0 sending 15 bytes 00 01 6f 75 74 70 75 74 00 6f 63 74 65 74 00 received 516 bytes: 0003 0001 End then it quits, no error, no warning, but file should be 128kB _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
