On 10:46 Mon 15 Aug , Sascha Hauer wrote: > Hi, > > We have a nice devinfo command which can print the devices as a tree. > Let's make more use of it and make spi/network/console devices children > of the corresponding hardware devices. > Also, when a file under /dev/ is associated to a device, print the > start and end with the information. > > On a i.MX51 babbage board we change from: > > devices: > |----imx_serial0 > |----cs0 > |----mem0 (ram0) > |----imx_iim0 (imx_iim_bank0, imx_iim_bank1, imx_iim_bank2, imx_iim_bank3, imx_iim_bank4, imx_iim_bank5, imx_iim_bank6, imx_iim_bank7) > |----ramfs0 > |----devfs0 > |----mem1 (defaultenv) > |----mem2 (mem) > |----fec_imx0 > |----miidev0 (phy0) > |----eth0 > |----imx-esdhc0 > |----mci0 > |----disk0 > |----imx_spi0 > |----mc13892-spi0 (mc13892) > > to this: > > devices: > `---- imx_serial0 > `---- cs0 > `---- mem0 > `---- 0x00000000-0x1fffffff: /dev/ram0 > `---- imx_iim0 > `---- 0x00000000-0x0000001f: /dev/imx_iim_bank0 > `---- 0x00000000-0x0000001f: /dev/imx_iim_bank1 > `---- 0x00000000-0x0000001f: /dev/imx_iim_bank2 > `---- 0x00000000-0x0000001f: /dev/imx_iim_bank3 > `---- 0x00000000-0x0000001f: /dev/imx_iim_bank4 > `---- 0x00000000-0x0000001f: /dev/imx_iim_bank5 > `---- 0x00000000-0x0000001f: /dev/imx_iim_bank6 > `---- 0x00000000-0x0000001f: /dev/imx_iim_bank7 > `---- ramfs0 > `---- devfs0 > `---- mem1 > `---- 0x00000000-0x00001e08: /dev/defaultenv > `---- mem2 > `---- 0x00000000-0xfffffffe: /dev/mem > `---- fec_imx0 > `---- miidev0 > `---- 0x00000000-0x0000003f: /dev/phy0 > `---- eth0 > `---- imx-esdhc0 > `---- mci0 > `---- disk0 > `---- imx_spi0 > `---- mc13892-spi0 > `---- 0x00000000-0x000000ff: /dev/mc13892 can we split tehem by bus? Best Regards, J. _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
