Hi Sascha, On Mon, Jun 20, 2011 at 9:04 AM, Sascha Hauer <s.hauer@xxxxxxxxxxxxxx> wrote: > Hi Marek, > > On Fri, Jun 17, 2011 at 09:26:46PM +0200, Belisko Marek wrote: >> Hi, >> >> I'm trying to boot barebox on Panda rev. A2. > > Hm, I don't know the revision of our panda board. I'll have a look > later, it may be different. > >> >> I make panda_xload_defconfig compile and put to FAT SD card partition >> ranamed barebox.bin to u-boot.bin (MLO reads u-boot.bin by default). > > I'm a bit confused. The binary resulting from xload_defconfig is > supposed to replace MLO. There are two panda defconfig in the tree, one > for xloader replacement and one regular full blown config. > >> >> Barebox start but after printing revision number is stuck. I add some >> printks and >> seems it hang in omap_hsmmc_probe funtion after mci_register(&hsmmc->mci) call. >> >> I try with 2 SD cards and non of them is working. >> >> Also try to load to flash partition only barebox.bin.itf + barebox.bin >> but this setup also >> doesn't work. AFAIU itf add some data before barebox to be possible to >> boot directly without >> x-loader. When run_shell is called barebox.bin should be copied do >> DDRAM and run. > > Ok, let's try to sort things a bit. > does panda_xload_defconfig barebox.bin.itf copied as MLO to the SD card > produce any output? > Does panda_defconfig copied as u-boot.bin to the SD card work or does it > behave like you described above? Well I create barebox.bin.itf with xloader_defconfig copy to SD card renamed to MLO. Create barebox.bin copy to SD card. Output which I got is: barebox 2011.04.0-00158-g2153636-dirty (Jun 20 2011 - 19:50:23) Board: Texas Instrument's Panda PandaBoard Revision: 003 omap_mmc_probe <- debug where it just hang. @Jan: Which board revision you have? I have bad feeling it has something to do with SD cards which I have? Thanks for replies. > > Sascha > > -- > Pengutronix e.K. | | > Industrial Linux Solutions | http://www.pengutronix.de/ | > Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | > Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | > regards, marek -- as simple and primitive as possible ------------------------------------------------- Marek Belisko - OPEN-NANDRA Freelance Developer Ruska Nova Ves 219 | Presov, 08005 Slovak Republic Tel: +421 915 052 184 skype: marekwhite icq: 290551086 web: http://open-nandra.com _______________________________________________ barebox mailing list barebox@xxxxxxxxxxxxxxxxxxx http://lists.infradead.org/mailman/listinfo/barebox
