The following adds support for the Ka-Ro tx25 board. Also, it brings
the i.MX25 iomux support (more or less) in sync with the kernel. The
kernel currently sets the sion bit for gpios which is imo wrong, so
this patch does not set the sion bits.
Sascha
Sascha Hauer (4):
ARM i.MX: sync i.MX25 iomux support with kernel
ARM i.MX esdctl: Add some missing bitfields
initial karo tx25 board support
ARM tx25: Add defconfig
arch/arm/Makefile | 1 +
arch/arm/boards/eukrea_cpuimx25/eukrea_cpuimx25.c | 90 +-
arch/arm/boards/freescale-mx25-3-stack/3stack.c | 36 +-
arch/arm/boards/karo-tx25/Makefile | 24 +
arch/arm/boards/karo-tx25/board.c | 312 +++++
arch/arm/boards/karo-tx25/config.h | 31 +
arch/arm/boards/karo-tx25/env/bin/init_board | 6 +
arch/arm/boards/karo-tx25/env/config | 53 +
arch/arm/boards/karo-tx25/lowlevel.c | 173 +++
arch/arm/configs/tx25stk5_defconfig | 49 +
arch/arm/mach-imx/Kconfig | 9 +
arch/arm/mach-imx/include/mach/esdctl.h | 4 +
arch/arm/mach-imx/include/mach/iomux-mx25.h | 1288 +++++++++------------
arch/arm/mach-imx/include/mach/iomux-mx51.h | 2 +-
arch/arm/mach-imx/include/mach/iomux-v3.h | 37 +-
15 files changed, 1264 insertions(+), 851 deletions(-)
create mode 100644 arch/arm/boards/karo-tx25/Makefile
create mode 100644 arch/arm/boards/karo-tx25/board.c
create mode 100644 arch/arm/boards/karo-tx25/config.h
create mode 100644 arch/arm/boards/karo-tx25/env/bin/init_board
create mode 100644 arch/arm/boards/karo-tx25/env/config
create mode 100644 arch/arm/boards/karo-tx25/lowlevel.c
create mode 100644 arch/arm/configs/tx25stk5_defconfig
_______________________________________________
barebox mailing list
barebox@xxxxxxxxxxxxxxxxxxx
http://lists.infradead.org/mailman/listinfo/barebox
