On Thu, 2016-02-11 at 09:44 -0800, Schlacta, Christ wrote: > I apologize, as last night I accidentally replied off-list to this > thread due to a mis-configured list. I've recreated the messages > below, updated the time, and corrected a typo. > > > On Thu, Feb 11, 2016 at 12:00 AM, Nicholas A. Bellinger > <nab@xxxxxxxxxxxxxxx> wrote: > > On Wed, 2016-02-10 at 18:36 -0800, Schlacta, Christ wrote: > >> I'm trying to run lio with targetcli and tcm_qla2xxx and of course > >> qla2xxx on debian jessie with kernel debian 3.16.0-4, and I'm running > >> into the strangest issue. I'm seeing everything as apparently correct > >> in targetcli, with no unexpected errors in dmesg or otherwise. The > >> card works fine, as it functioned correctly with scst, but I get only > >> one device on the initiator now, and it's not any of the devices I've > >> configured. It appears as follows in the client on QConvergeConsole > >> (The management software for the windows driver): > >> > >> Product Vendor: > >> LIO-ORG > >> Product ID: > >> RAMDISK-MCP > >> Product Revision: > >> 4.0 > >> LUN: > >> 0 > >> Size: > >> Unknown > >> Type: > >> Unknown > >> WWULN: > >> 4C-49-4F-2D-4F-52-47-00-00 > >> > > > > The LUN=0 above is a Virtual LUN=0 provided by LIO to all demo-mode > > target_core_mod sessions, when no matching explicit NodeACL + MappedLUNs > > groups for LUN=0 within tcm_qla2xxx endpoint + port configfs exist. > > I figured it was something like that. For the record, scst provides no > such nodes, and entire loops can have no nodes present, or even nodes > that start above zero. It's useful for maintaining (virtual) disk -> > lun mapping. Not sure how that relates to NodeACL + MappedLUNs here. > > > > >> I got no idea what to try, but I'm thinking about switching back to > >> scst even though I upgraded to debian jessie to get in-kernel lio if I > >> can't figure out what's wrong here. Tell me what you'd like to see, > >> and I'll share it. Below are some log snippets that I doubt will be > >> useful, but may be. > >> > >> [11717.118353] qla2xxx [0000:05:00.0]-505f:5: Link is operational (4 Gbps). > >> [11717.527716] qla2xxx [0000:05:00.0]-1020:5: **** Failed mbx[0]=4005, > >> mb[1]=4, mb[2]=8807, mb[3]=ffff, cmd=70 ****. > >> [11717.528120] qla2xxx [0000:05:00.0]-0121:5: Failed to enable > >> receiving of RSCN requests: 0x2. > >> > >> /qla2xxx/21:0...9d:12:dd/acls> ls / > >> o- / .............................................. [...] > >> o- backstores ................................... [...] > >> | o- fileio ....................... [3 Storage Objects] > >> | | o- izanami01 . [256.0G, /vdisk02/izanami01, in use] > >> | | o- test01 ....... [256.0G, /vdisk02/test01, in use] > >> | | o- test02 ....... [256.0G, /vdisk02/test02, in use] > >> | o- iblock ........................ [0 Storage Object] > >> | o- pscsi ......................... [0 Storage Object] > >> | o- rd_mcp ........................ [0 Storage Object] > >> o- iscsi .................................. [0 Targets] > >> o- loopback ............................... [0 Targets] > >> o- qla2xxx ................................. [1 Target] > >> | o- 21:00:00:1b:32:9d:12:dd ................ [enabled] > >> | o- acls ................................... [1 ACL] > >> | | o- 20:00:00:1b:32:9d:77:da ...... [3 Mapped LUNs] > >> | | o- mapped_lun0 .................... [lun0 (rw)] > >> | | o- mapped_lun1 .................... [lun1 (rw)] > >> | | o- mapped_lun2 .................... [lun2 (rw)] > >> | o- luns .................................. [3 LUNs] > >> | o- lun0 . [fileio/izanami01 (/vdisk02/izanami01)] > >> | o- lun1 ....... [fileio/test01 (/vdisk02/test01)] > >> | o- lun2 ....... [fileio/test02 (/vdisk02/test02)] > >> o- vhost .................................. [0 Targets] > > > > Looks fine as an NodeACL + MappedLUN for 20:00:00:1b:32:9d:77:da > > > > Please confirm your FC WWPN initiator port (non-NPIV) value > > > > I'm not at the initiator now, but I'll check later. In recent versions of tcm_qla2xxx, there is a configfs attribute to list which 'demo-mode' sessions are active: cat /sys/kernel/config/target/qla2xxx/$WWPN/tpgt_1/dynamic_sessions This will show which $INITIATOR_WWPN ports have logged in, vs. what's currently configured in /qla2xxx/$WWPN/acls/$INITIATOR_WWPN/ for explicit NodeACLs. > In the mean time, > can I somehow disable acls, as there is only the two endpoints on the > physical loop, and that's enough access control for testing purposes? > (No switch) Yes, in targetcli under each /qla2xxx/$WWPN/ context, do: /> cd /qla2xxx/21:00:00:24:ff:48:97:7e/ /qla2xxx/21:0...4:ff:48:97:7e> set attribute generate_node_acls=1 cache_dynamic_acls=1 demo_mode_write_protect=1 Parameter generate_node_acls is now '1'. Parameter cache_dynamic_acls is now '1'. Parameter demo_mode_write_protect is now '1'. Keep in mind, if your initiator WWPNs has already logged in to the individual target WWPN, and session instance is resident in memory. In order for the demo-mode changes to take effect on current sessions without an explicit NodeACL, you'll want to 'saveconfig' and then /etc/init.d/target restart. -- To unsubscribe from this list: send the line "unsubscribe target-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
