On Wed, 2016-02-10 at 18:36 -0800, Schlacta, Christ wrote: > I'm trying to run lio with targetcli and tcm_qla2xxx and of course > qla2xxx on debian jessie with kernel debian 3.16.0-4, and I'm running > into the strangest issue. I'm seeing everything as apparently correct > in targetcli, with no unexpected errors in dmesg or otherwise. The > card works fine, as it functioned correctly with scst, but I get only > one device on the initiator now, and it's not any of the devices I've > configured. It appears as follows in the client on QConvergeConsole > (The management software for the windows driver): > > Product Vendor: > LIO-ORG > Product ID: > RAMDISK-MCP > Product Revision: > 4.0 > LUN: > 0 > Size: > Unknown > Type: > Unknown > WWULN: > 4C-49-4F-2D-4F-52-47-00-00 > The LUN=0 above is a Virtual LUN=0 provided by LIO to all demo-mode target_core_mod sessions, when no matching explicit NodeACL + MappedLUNs groups for LUN=0 within tcm_qla2xxx endpoint + port configfs exist. > I got no idea what to try, but I'm thinking about switching back to > scst even though I upgraded to debian jessie to get in-kernel lio if I > can't figure out what's wrong here. Tell me what you'd like to see, > and I'll share it. Below are some log snippets that I doubt will be > useful, but may be. > > [11717.118353] qla2xxx [0000:05:00.0]-505f:5: Link is operational (4 Gbps). > [11717.527716] qla2xxx [0000:05:00.0]-1020:5: **** Failed mbx[0]=4005, > mb[1]=4, mb[2]=8807, mb[3]=ffff, cmd=70 ****. > [11717.528120] qla2xxx [0000:05:00.0]-0121:5: Failed to enable > receiving of RSCN requests: 0x2. > > /qla2xxx/21:0...9d:12:dd/acls> ls / > o- / .............................................. [...] > o- backstores ................................... [...] > | o- fileio ....................... [3 Storage Objects] > | | o- izanami01 . [256.0G, /vdisk02/izanami01, in use] > | | o- test01 ....... [256.0G, /vdisk02/test01, in use] > | | o- test02 ....... [256.0G, /vdisk02/test02, in use] > | o- iblock ........................ [0 Storage Object] > | o- pscsi ......................... [0 Storage Object] > | o- rd_mcp ........................ [0 Storage Object] > o- iscsi .................................. [0 Targets] > o- loopback ............................... [0 Targets] > o- qla2xxx ................................. [1 Target] > | o- 21:00:00:1b:32:9d:12:dd ................ [enabled] > | o- acls ................................... [1 ACL] > | | o- 20:00:00:1b:32:9d:77:da ...... [3 Mapped LUNs] > | | o- mapped_lun0 .................... [lun0 (rw)] > | | o- mapped_lun1 .................... [lun1 (rw)] > | | o- mapped_lun2 .................... [lun2 (rw)] > | o- luns .................................. [3 LUNs] > | o- lun0 . [fileio/izanami01 (/vdisk02/izanami01)] > | o- lun1 ....... [fileio/test01 (/vdisk02/test01)] > | o- lun2 ....... [fileio/test02 (/vdisk02/test02)] > o- vhost .................................. [0 Targets] Looks fine as an NodeACL + MappedLUN for 20:00:00:1b:32:9d:77:da Please confirm your FC WWPN initiator port (non-NPIV) value -- To unsubscribe from this list: send the line "unsubscribe target-devel" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
