On 18.11.2022 03:46, Salvatore Mazzarino wrote:
Posted a wrong config for br0.netdev. the correct one is the following
br0.netdev
[NetDev]
Name=br0
Kind=bridge
[Bridge]
DefaultPVID=1
VLANFiltering=yes
On Fri, Nov 18, 2022 at 1:43 AM Salvatore Mazzarino <apocalipse89@xxxxxxxxx>
wrote:
I have a physical interface named enp89s0 on a machine which runs VM with
libvirt.These VMs have to run in a VLAN. The physical interface is attached
to the default VLAN (1).
My config
br0.dev
[NetDev]
Name=br166
Kind=bridge
br0.network
[Match]
Name=br0
[Network]
VLAN=eth.1
VLAN=eth.166
[BridgeVLAN]
VLAN=1
[BridgeVLAN]
VLAN=166
br166.netdev
[NetDev]
Name=br166
Kind=bridge
br166.network
[Match]
Name=br166
[Network]
DHCP=no
enp89s0.network
[Match]
Name=enp89s0
[Network]
Bridge=br0
eth.1.netdev
[NetDev]
Name=eth.1
Kind=vlan
[VLAN]
Id=1
eth.1.network
[Match]
Name=eth.1
[Network]
DHCP=yes
eth.166.netdev
[NetDev]
Name=eth.166
Kind=vlan
[VLAN]
Id=166
eth.166.network
[Match]
Name=eth.166
[Network]
Bridge=br166
DHCP=no
the interface eth.1 correctly gets UP and it receives the IP addr from the
primary lan. when I connect my libvirt VMs to the br166 unfortunately they
do not get any IPs from the VLAN 166 (DHCP is there so they should get it).
Did you configure switch port for tagged VLAN 166? Do you have DHCP
server in VLAN 166?
I'm sure my networkd config is off in some parts but not sure where.
conceptually it should be correct.
