On Fri, Apr 03, 2015 at 01:55:07PM -0700, Olof Johansson wrote: > On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote: > > Le 31/03/2015 10:56, Nicolas Ferre a écrit : > > > After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091) > > > the macb1 interface refuses to work properly because it tries > > > to cling to address 0 which isn't able to communicate in broadcast with > > > the mac anymore. The micrel phy on the board is actually configured > > > to show up at address 1. > > > Adding the phy node and its real address fixes the issue. > > > > > > Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx> > > > Cc: Johan Hovold <johan@xxxxxxxxxx> > > > Cc: <stable@xxxxxxxxxxxxxxx> #3.19 > > > --- > > > > Arnd, Olof, Kevin, > > > > It seems late but, is it possible to queue this patch as a 4.0 fixes? > > > > Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used > > by u-boot previously. > > Sure, resend it to arm@xxxxxxxxxx. Nevermind, I ended up picking it up from the list. Applied. -Olof -- To unsubscribe from this list: send the line "unsubscribe stable" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html