Re: [PATCH] ARM: at91/dt: sama5d3 xplained: add phy address for macb1

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 03, 2015 at 10:43:40AM +0200, Nicolas Ferre wrote:
> Le 31/03/2015 10:56, Nicolas Ferre a écrit :
> > After 57a38effa598 (net: phy: micrel: disable broadcast for KSZ8081/KSZ8091)
> > the macb1 interface refuses to work properly because it tries
> > to cling to address 0 which isn't able to communicate in broadcast with
> > the mac anymore. The micrel phy on the board is actually configured
> > to show up at address 1.
> > Adding the phy node and its real address fixes the issue.
> > 
> > Signed-off-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx>
> > Cc: Johan Hovold <johan@xxxxxxxxxx>
> > Cc: <stable@xxxxxxxxxxxxxxx> #3.19
> > ---
> 
> Arnd, Olof, Kevin,
> 
> It seems late but, is it possible to queue this patch as a 4.0 fixes?
> 
> Without it, the 10/100 Ethernet on sama5d3 doesn't work if it's not used
> by u-boot previously.

Sure, resend it to arm@xxxxxxxxxx.


-Olof
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]