When multiple ODR switch happens during FIFO off, the change could
not be taken into account if you get back to previous FIFO on value.
For example, if you run sensor buffer at 50Hz, stop, change to
200Hz, then back to 50Hz and restart buffer, data will be timestamped
at 200Hz. This due to testing against mult and not new_mult.
To prevent this, let's just run apply_odr automatically when FIFO is
off. It will also simplify driver code.
Update inv_mpu6050 and inv_icm42600 to delete now useless apply_odr.
Fixes: 95444b9eeb8c ("iio: invensense: fix odr switching to same value")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@xxxxxxx>
Link: https://patch.msgid.link/20241021-invn-inv-sensors-timestamp-fix-switch-fifo-off-v2-1-39ffd43edcc4@xxxxxxx
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx>
diff --git a/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c b/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c
index f44458c380d9..37d0bdaa8d82 100644
--- a/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c
+++ b/drivers/iio/common/inv_sensors/inv_sensors_timestamp.c
@@ -70,6 +70,10 @@ int inv_sensors_timestamp_update_odr(struct inv_sensors_timestamp *ts,
if (mult != ts->mult)
ts->new_mult = mult;
+ /* When FIFO is off, directly apply the new ODR */
+ if (!fifo)
+ inv_sensors_timestamp_apply_odr(ts, 0, 0, 0);
+
return 0;
}
EXPORT_SYMBOL_NS_GPL(inv_sensors_timestamp_update_odr, IIO_INV_SENSORS_TIMESTAMP);
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
index 56ac19814250..7968aa27f9fd 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_accel.c
@@ -200,7 +200,6 @@ static int inv_icm42600_accel_update_scan_mode(struct iio_dev *indio_dev,
{
struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
struct inv_icm42600_sensor_state *accel_st = iio_priv(indio_dev);
- struct inv_sensors_timestamp *ts = &accel_st->ts;
struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
unsigned int fifo_en = 0;
unsigned int sleep_temp = 0;
@@ -229,7 +228,6 @@ static int inv_icm42600_accel_update_scan_mode(struct iio_dev *indio_dev,
}
/* update data FIFO write */
- inv_sensors_timestamp_apply_odr(ts, 0, 0, 0);
ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en);
out_unlock:
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c
index 938af5b640b0..c6bb68bf5e14 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_gyro.c
@@ -99,8 +99,6 @@ static int inv_icm42600_gyro_update_scan_mode(struct iio_dev *indio_dev,
const unsigned long *scan_mask)
{
struct inv_icm42600_state *st = iio_device_get_drvdata(indio_dev);
- struct inv_icm42600_sensor_state *gyro_st = iio_priv(indio_dev);
- struct inv_sensors_timestamp *ts = &gyro_st->ts;
struct inv_icm42600_sensor_conf conf = INV_ICM42600_SENSOR_CONF_INIT;
unsigned int fifo_en = 0;
unsigned int sleep_gyro = 0;
@@ -128,7 +126,6 @@ static int inv_icm42600_gyro_update_scan_mode(struct iio_dev *indio_dev,
}
/* update data FIFO write */
- inv_sensors_timestamp_apply_odr(ts, 0, 0, 0);
ret = inv_icm42600_buffer_set_fifo_en(st, fifo_en | st->fifo.en);
out_unlock:
diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
index 3bfeabab0ec4..5b1088cc3704 100644
--- a/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
+++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_trigger.c
@@ -112,7 +112,6 @@ int inv_mpu6050_prepare_fifo(struct inv_mpu6050_state *st, bool enable)
if (enable) {
/* reset timestamping */
inv_sensors_timestamp_reset(&st->timestamp);
- inv_sensors_timestamp_apply_odr(&st->timestamp, 0, 0, 0);
/* reset FIFO */
d = st->chip_config.user_ctrl | INV_MPU6050_BIT_FIFO_RST;
ret = regmap_write(st->map, st->reg->user_ctrl, d);
