Re: [PATCH v2] dmaengine: dw: Select only supported masters for ACPI devices

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Sep 20, 2024 at 10:52:18AM +0200, Ferry Toth wrote:
> Op donderdag 19 september 2024 22:06:24 CEST schreef Andy Shevchenko:
> > On Thu, Sep 19, 2024 at 09:51:48PM +0300, Serge Semin wrote:

...

> > > Fix the problem by specifying a single master ID for both memory and
> > > peripheral devices on the ACPI-based platforms if there is only one master
> > > available on the controller. Thus the issue noticed for the iDMA32
> > > controllers will be eliminated and the ACPI-probed DW DMA controllers will
> > > be configured with the correct master ID by default.
> > 
> > Tested-by: Andy Shevchenko <andriy.shevchenko@xxxxxxxxxxxxxxx>
> > Seems this fixes the bug I have seen.
> > Ferry, can you confirm?
> I was testing something else and broke my setup :-(
> I’ll fix that and test this patch this weekend.

Thinking about this more I believe it's not the best what we can do.
Because this leaves a potential gap for the devices of more than one
master but in different order.

I'll send another patch after my testing.

-- 
With Best Regards,
Andy Shevchenko






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux