Hi Umang,
Thank you for the patch.
On Mon, Jul 29, 2024 at 04:34:37PM +0530, Umang Jain wrote:
> Rectify the logical value of reset-gpio so that it is set to
> 0 (disabled) during power-on and to 1 (enabled) during power-off.
>
> Meanwhile at it, set the reset-gpio to GPIO_OUT_HIGH at initialization
> time to make sure it starts off in reset.
>
> Fixes: 45d19b5fb9ae ("media: i2c: Add imx335 camera sensor driver")
> Signed-off-by: Umang Jain <umang.jain@xxxxxxxxxxxxxxxx>
> ---
> drivers/media/i2c/imx335.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/i2c/imx335.c b/drivers/media/i2c/imx335.c
> index cd150606a8a9..7241fc87ef84 100644
> --- a/drivers/media/i2c/imx335.c
> +++ b/drivers/media/i2c/imx335.c
> @@ -1057,7 +1057,7 @@ static int imx335_parse_hw_config(struct imx335 *imx335)
>
> /* Request optional reset pin */
> imx335->reset_gpio = devm_gpiod_get_optional(imx335->dev, "reset",
> - GPIOD_OUT_LOW);
> + GPIOD_OUT_HIGH);
> if (IS_ERR(imx335->reset_gpio)) {
> dev_err(imx335->dev, "failed to get reset gpio %ld\n",
> PTR_ERR(imx335->reset_gpio));
> @@ -1171,7 +1171,7 @@ static int imx335_power_on(struct device *dev)
> usleep_range(500, 550); /* Tlow */
>
> /* Set XCLR */
I would replace this with
/* Deassert the reset (XCLR) signal. */
or something similar.
Reviewed-by: Laurent Pinchart <laurent.pinchart@xxxxxxxxxxxxxxxx>
> - gpiod_set_value_cansleep(imx335->reset_gpio, 1);
> + gpiod_set_value_cansleep(imx335->reset_gpio, 0);
>
> ret = clk_prepare_enable(imx335->inclk);
> if (ret) {
> @@ -1184,7 +1184,7 @@ static int imx335_power_on(struct device *dev)
> return 0;
>
> error_reset:
> - gpiod_set_value_cansleep(imx335->reset_gpio, 0);
> + gpiod_set_value_cansleep(imx335->reset_gpio, 1);
> regulator_bulk_disable(ARRAY_SIZE(imx335_supply_name), imx335->supplies);
>
> return ret;
> @@ -1201,7 +1201,7 @@ static int imx335_power_off(struct device *dev)
> struct v4l2_subdev *sd = dev_get_drvdata(dev);
> struct imx335 *imx335 = to_imx335(sd);
>
> - gpiod_set_value_cansleep(imx335->reset_gpio, 0);
> + gpiod_set_value_cansleep(imx335->reset_gpio, 1);
> clk_disable_unprepare(imx335->inclk);
> regulator_bulk_disable(ARRAY_SIZE(imx335_supply_name), imx335->supplies);
>
--
Regards,
Laurent Pinchart
