Re: [PATCH] PCI: j721e: Set .map_irq and .swizzle_irq to NULL

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Thu, Jul 25, 2024 at 02:01:48PM +0530, Siddharth Vadapalli wrote:
> On Thu, Jul 25, 2024 at 01:17:08PM +0530, Manivannan Sadhasivam wrote:
> > On Thu, Jul 25, 2024 at 10:50:13AM +0530, Siddharth Vadapalli wrote:
> > > On Wed, Jul 24, 2024 at 09:49:16PM +0530, Manivannan Sadhasivam wrote:
> > > > On Wed, Jul 24, 2024 at 12:20:48PM +0530, Siddharth Vadapalli wrote:
> > > > > Since the configuration of Legacy Interrupts (INTx) is not supported, set
> > > > > the .map_irq and .swizzle_irq callbacks to NULL. This fixes the error:
> > > > >   of_irq_parse_pci: failed with rc=-22
> > > > > due to the absence of Legacy Interrupts in the device-tree.
> > > > > 
> > > > 
> > > > Do you really need to set 'swizzle_irq' to NULL? pci_assign_irq() will bail out
> > > > if 'map_irq' is set to NULL.
> > > 
> > > While 'swizzle_irq' won't be invoked if 'map_irq' is NULL, having a
> > > non-NULL 'swizzle_irq' (pci_common_swizzle in this case) with a NULL
> > > 'map_irq' seems inconsistent to me though the code-path may never invoke
> > > it. Wouldn't a non-NULL 'swizzle_irq' imply that Legacy Interrupts are
> > > supported, while a NULL 'map_irq' indicates that they aren't? Since they
> > > are always described in pairs, whether it is in the initial commit that
> > > added support for the Cadence PCIe Host controller (used by pci-j721e.c):
> > > https://github.com/torvalds/linux/commit/1b79c5284439
> > > OR the commit which moved the shared 'map_irq' and 'swizzle_irq' defaults
> > > from all the host drivers into the common 'devm_of_pci_bridge_init()'
> > > function:
> > > https://github.com/torvalds/linux/commit/b64aa11eb2dd
> > > I have set both of them to NULL for the sake of consistency.
> > > 
> > 
> > Since both callbacks are populated in the pci/of driver, this consistency won't
> > be visible in the controller drivers. From the functionality pov, setting both
> > callbacks to NULL is *not* required to disable INTx, right?
> 
> Yes, setting 'swizzle_irq' to NULL isn't required. The execution sequence
> with 'swizzle_irq' set to 'pci_common_swizzle()' is as follows:
> 
> pci_assign_irq()
>   if (pin) {
>     if (hbrg->swizzle_irq)
>       slot = (*(hbrg->swizzle_irq))(dev, &pin);
>         pci_common_swizzle()
> 	  while (!pci_is_root_bus(dev->bus)) <= NOT entered
> 	..continue execution similar to 'swizzle_irq' being NULL.
> 
> Having 'swizzle_irq' set to 'pci_common_swizzle()' will only result
> in a no-op which could have been avoided by setting it to NULL. So there
> is no difference w.r.t. functionality.

Mani,

I prefer setting 'swizzle_irq' to NULL as well unless you have an objection
to it. Kindly let me know. I plan to post the v2 for this patch addressing
Bjorn's feedback and collecting Andrew's "Tested-by" tag as well.

Regards,
Siddharth.




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux