The FIFO is 64 bytes, but the FCR is configured to fire the TX interrupt
when the FIFO is half empty (bit 3 = 0). Thus, we should only write 32
bytes when a TX interrupt occurs.
This fixes a problem observed on the PXA168 that dropped a bunch of TX
bytes during large transmissions.
Fixes: ab28f51c77cd ("serial: rewrite pxa2xx-uart to use 8250_core")
Signed-off-by: Doug Brown <doug@xxxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20240519191929.122202-1-doug@xxxxxxxxxxxxx
Cc: stable <stable@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
(cherry picked from commit 5208e7ced520a813b4f4774451fbac4e517e78b2)
Signed-off-by: Doug Brown <doug@xxxxxxxxxxxxx>
---
drivers/tty/serial/8250/8250_pxa.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/tty/serial/8250/8250_pxa.c b/drivers/tty/serial/8250/8250_pxa.c
index a5b3ea27fc90..2cbaf68d2811 100644
--- a/drivers/tty/serial/8250/8250_pxa.c
+++ b/drivers/tty/serial/8250/8250_pxa.c
@@ -124,6 +124,7 @@ static int serial_pxa_probe(struct platform_device *pdev)
uart.port.regshift = 2;
uart.port.irq = irq;
uart.port.fifosize = 64;
+ uart.tx_loadsz = 32;
uart.port.flags = UPF_IOREMAP | UPF_SKIP_TEST | UPF_FIXED_TYPE;
uart.port.dev = &pdev->dev;
uart.port.uartclk = clk_get_rate(data->clk);
--
2.34.1
