Currently, for JH7110 boards with EMMC slot, vqmmc voltage for EMMC is fixed to 1.8V, while the spec needs it to be 3.3V on low speed mode and should support switching to 1.8V when using higher speed mode. Since there are no other peripherals using the same voltage source of EMMC's vqmmc(ALDO4) on every board currently supported by mainline kernel, regulator-max-microvolt of ALDO4 should be set to 3.3V. Cc: stable@xxxxxxxxxxxxxxx Signed-off-by: Shengyu Qu <wiagn233@xxxxxxxxxxx> Fixes: 7dafcfa79cc9 ("riscv: dts: starfive: enable DCDC1&ALDO4 node in axp15060") --- arch/riscv/boot/dts/starfive/jh7110-common.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi index 37b4c294ffcc..c7a549ec7452 100644 --- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi +++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi @@ -244,7 +244,7 @@ emmc_vdd: aldo4 { regulator-boot-on; regulator-always-on; regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; regulator-name = "emmc_vdd"; }; }; -- 2.39.2