adc0_lpcg: clock-controller@5ac80000 {
... Col1 Col2
clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>, // 0 0
<&dma_ipg_clk>; // 1 4
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
};
Col1: index, which exited dts try to get.
Col2: actual index in lpcg driver.
adc0: adc@5a880000 {
clocks = <&adc0_lpcg 0>, <&adc0_lpcg 1>;
^^ ^^
clocks = <&adc0_lpcg IMX_LPCG_CLK_0>, <&adc0_lpcg IMX_LPCG_CLK_4>;
Arg0 is divided by 4 in lpcg driver. So adc get IMX_SC_PM_CLK_PER by
<&adc0_lpcg 0>, <&adc0_lpcg 1>. Although function can work, code logic is
wrong. Fix it by using correct indices.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: 1db044b25d2e ("arm64: dts: imx8dxl: add adc0 support")
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index d4637037ba1b6..77ba2dd6847b4 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -377,8 +377,8 @@ adc0: adc@5a880000 {
reg = <0x5a880000 0x10000>;
interrupts = <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
- clocks = <&adc0_lpcg 0>,
- <&adc0_lpcg 1>;
+ clocks = <&adc0_lpcg IMX_LPCG_CLK_0>,
+ <&adc0_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_ADC_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
@@ -392,8 +392,8 @@ adc1: adc@5a890000 {
reg = <0x5a890000 0x10000>;
interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
interrupt-parent = <&gic>;
- clocks = <&adc1_lpcg 0>,
- <&adc1_lpcg 1>;
+ clocks = <&adc1_lpcg IMX_LPCG_CLK_0>,
+ <&adc1_lpcg IMX_LPCG_CLK_4>;
clock-names = "per", "ipg";
assigned-clocks = <&clk IMX_SC_R_ADC_1 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
--
2.34.1
