adma_pwm_lpcg: clock-controller@5a590000 {
... col1 col2
clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>,// 0 0
<&dma_ipg_clk>; // 1 4
clock-indices = <IMX_LPCG_CLK_0>, <IMX_LPCG_CLK_4>;
...
};
Col1: index, which exited dts try to get.
Col2: actual index in lpcg driver.
adma_pwm: pwm@5a190000 {
...
clocks = <&adma_pwm_lpcg 1>, <&adma_pwm_lpcg 0>;
^^ ^^
Should be
clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
<&adma_pwm_lpcg IMX_LPCG_CLK_0>;
};
Arg0 will be divided by 4 in lcpg driver, so pwm will get IMX_SC_PM_CLK_PER
by <&adma_pwm_lpcg 1>, <&adma_pwm_lpcg 0>. Although function can work, code
logic is wrong. Fix it by use correct indices.
Cc: stable@xxxxxxxxxxxxxxx
Fixes: f1d6a6b991ef ("arm64: dts: imx8qxp: add adma_pwm in adma")
Signed-off-by: Frank Li <Frank.Li@xxxxxxx>
---
arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
index a124d6598406d..d4637037ba1b6 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-dma.dtsi
@@ -144,8 +144,8 @@ adma_pwm: pwm@5a190000 {
compatible = "fsl,imx8qxp-pwm", "fsl,imx27-pwm";
reg = <0x5a190000 0x1000>;
interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&adma_pwm_lpcg 1>,
- <&adma_pwm_lpcg 0>;
+ clocks = <&adma_pwm_lpcg IMX_LPCG_CLK_4>,
+ <&adma_pwm_lpcg IMX_LPCG_CLK_0>;
clock-names = "ipg", "per";
assigned-clocks = <&clk IMX_SC_R_LCD_0_PWM_0 IMX_SC_PM_CLK_PER>;
assigned-clock-rates = <24000000>;
--
2.34.1
