Re: [PATCH] clk: qcom: apss-ipq-pll: use stromer ops for IPQ5018 to fix boot failure

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 





On 3/11/2024 8:36 PM, Gabor Juhos wrote:
Booting v6.8 results in a hang on various IPQ5018 based boards.
Investigating the problem showed that the hang happens when the
clk_alpha_pll_stromer_plus_set_rate() function tries to write
into the PLL_MODE register of the APSS PLL.

Checking the downstream code revealed that it uses [1] stromer
specific operations for IPQ5018, whereas in the current code
the stromer plus specific operations are used.

The ops in the 'ipq_pll_stromer_plus' clock definition can't be
changed since that is needed for IPQ5332, so add a new alpha pll
clock declaration which uses the correct stromer ops and use this
new clock for IPQ5018 to avoid the boot failure.

1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c#L67


Thanks for catching this!

Tested-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>
Reviewed-by: Kathiravan Thirumoorthy <quic_kathirav@xxxxxxxxxxx>



Cc: stable@xxxxxxxxxxxxxxx
Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018")
Signed-off-by: Gabor Juhos <j4g8y7@xxxxxxxxx>
---
Based on v6.8.
---
  drivers/clk/qcom/apss-ipq-pll.c | 20 +++++++++++++++++++-
  1 file changed, 19 insertions(+), 1 deletion(-)




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux