Booting v6.8 results in a hang on various IPQ5018 based boards. Investigating the problem showed that the hang happens when the clk_alpha_pll_stromer_plus_set_rate() function tries to write into the PLL_MODE register of the APSS PLL. Checking the downstream code revealed that it uses [1] stromer specific operations for IPQ5018, whereas in the current code the stromer plus specific operations are used. The ops in the 'ipq_pll_stromer_plus' clock definition can't be changed since that is needed for IPQ5332, so add a new alpha pll clock declaration which uses the correct stromer ops and use this new clock for IPQ5018 to avoid the boot failure. 1. https://git.codelinaro.org/clo/qsdk/oss/kernel/linux-ipq-5.4/-/blob/NHSS.QSDK.12.4/drivers/clk/qcom/apss-ipq5018.c#L67 Cc: stable@xxxxxxxxxxxxxxx Fixes: 50492f929486 ("clk: qcom: apss-ipq-pll: add support for IPQ5018") Signed-off-by: Gabor Juhos <j4g8y7@xxxxxxxxx> --- Based on v6.8. --- drivers/clk/qcom/apss-ipq-pll.c | 20 +++++++++++++++++++- 1 file changed, 19 insertions(+), 1 deletion(-) diff --git a/drivers/clk/qcom/apss-ipq-pll.c b/drivers/clk/qcom/apss-ipq-pll.c index 678b805f13d45..11f1ae59438f7 100644 --- a/drivers/clk/qcom/apss-ipq-pll.c +++ b/drivers/clk/qcom/apss-ipq-pll.c @@ -55,6 +55,24 @@ static struct clk_alpha_pll ipq_pll_huayra = { }, }; +static struct clk_alpha_pll ipq_pll_stromer = { + .offset = 0x0, + .regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_STROMER_PLUS], + .flags = SUPPORTS_DYNAMIC_UPDATE, + .clkr = { + .enable_reg = 0x0, + .enable_mask = BIT(0), + .hw.init = &(struct clk_init_data){ + .name = "a53pll", + .parent_data = &(const struct clk_parent_data) { + .fw_name = "xo", + }, + .num_parents = 1, + .ops = &clk_alpha_pll_stromer_ops, + }, + }, +}; + static struct clk_alpha_pll ipq_pll_stromer_plus = { .offset = 0x0, .regs = ipq_pll_offsets[CLK_ALPHA_PLL_TYPE_STROMER_PLUS], @@ -145,7 +163,7 @@ struct apss_pll_data { static const struct apss_pll_data ipq5018_pll_data = { .pll_type = CLK_ALPHA_PLL_TYPE_STROMER_PLUS, - .pll = &ipq_pll_stromer_plus, + .pll = &ipq_pll_stromer, .pll_config = &ipq5018_pll_config, }; --- base-commit: e8f897f4afef0031fe618a8e94127a0934896aba change-id: 20240311-apss-ipq-pll-ipq5018-hang-74d9a8f47136 Best regards, -- Gabor Juhos <j4g8y7@xxxxxxxxx>
