On Mon, Feb 26, 2024 at 11:20:47PM +0800, Shengyu Qu wrote: > Hi Andrew, > > When telnet connected to the stick(It's using busybox), "cat /proc/kmsg" > would report something like "<4>change mode to 0", that 0 is the actual > speed rate codename it changes to. You could check this [1] for more > information. > > Sorry but I can't record my kmsg output now, since enable connection to > my stick would make the network to disconnect for all users and my > roommates are using it. > > Best regards, > Shengyu > > [1] https://github.com/Anime4000/RTL960x/blob/main/Docs/FLASH_GETSET_INFO.md#lan_sds_mode I'm aware of that link, and sadly the information in that table can at best be described as "confused". For example, under "Behaviour" it mentions "1GbaseT/100baseT". How exactly does a SFP module exhibit baseT behaviour (which is twisted pair copper ethernet.) Hint: it can't and it doesn't. "Mode" being listed as "TP" is also misleading and wrong. The ethtool value of 0x20 is bit 5, which is 1000baseT_Full which has nothing to do with a SFP (and won't be reported as even a supported mode for this SFP.) Bit 41 would make sense (1000baseX), which is listed against mode 1. I'm afraid looking at that URL just adds to more confusion. -- RMK's Patch system: https://www.armlinux.org.uk/developer/patches/ FTTP is here! 80Mbps down 10Mbps up. Decent connectivity at last!
