From: Takahiro Kuwano <Takahiro.Kuwano@xxxxxxxxxxxx>
Infineon(Cypress) SEMPER NOR flash family has on-die ECC and its program
granularity is 16-byte ECC data unit size. JFFS2 supports write buffer
mode for ECC'd NOR flash. To activate it, MTD_BIT_WRITEABLE needs to be
unset in mtd->flags.
A new SNOR_F_ECC flag is introduced to determine if the part has on-die
ECC and if it has, MTD_BIT_WRITEABLE is unset.
In vendor specific driver, a common cypress_nor_ecc_init() helper is
added. This helper takes care for ECC related initialization for SEMPER
flash family by setting up params->writesize and SNOR_F_ECC.
Fixes: 6afcc84080c4 ("mtd: spi-nor: spansion: Add support for Infineon S25FS256T")
Fixes: b6b23833fc42 ("mtd: spi-nor: spansion: Add s25hl-t/s25hs-t IDs and fixups")
Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Suggested-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@xxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
drivers/mtd/spi-nor/core.c | 3 +++
drivers/mtd/spi-nor/core.h | 1 +
drivers/mtd/spi-nor/debugfs.c | 1 +
drivers/mtd/spi-nor/spansion.c | 28 +++++++++++++++-------------
4 files changed, 20 insertions(+), 13 deletions(-)
diff --git a/drivers/mtd/spi-nor/core.c b/drivers/mtd/spi-nor/core.c
index c67369815fde..46592e04d5ef 100644
--- a/drivers/mtd/spi-nor/core.c
+++ b/drivers/mtd/spi-nor/core.c
@@ -3406,6 +3406,9 @@ static void spi_nor_set_mtd_info(struct spi_nor *nor)
mtd->name = dev_name(dev);
mtd->type = MTD_NORFLASH;
mtd->flags = MTD_CAP_NORFLASH;
+ /* Unset BIT_WRITEABLE to enable JFFS2 write buffer for ECC'd NOR */
+ if (nor->flags & SNOR_F_ECC)
+ mtd->flags &= ~MTD_BIT_WRITEABLE;
if (nor->info->flags & SPI_NOR_NO_ERASE)
mtd->flags |= MTD_NO_ERASE;
else
diff --git a/drivers/mtd/spi-nor/core.h b/drivers/mtd/spi-nor/core.h
index ea9033cb0a01..8cfa82ed06c7 100644
--- a/drivers/mtd/spi-nor/core.h
+++ b/drivers/mtd/spi-nor/core.h
@@ -131,6 +131,7 @@ enum spi_nor_option_flags {
SNOR_F_SOFT_RESET = BIT(12),
SNOR_F_SWP_IS_VOLATILE = BIT(13),
SNOR_F_RWW = BIT(14),
+ SNOR_F_ECC = BIT(15),
};
struct spi_nor_read_command {
diff --git a/drivers/mtd/spi-nor/debugfs.c b/drivers/mtd/spi-nor/debugfs.c
index e200f5b9234c..082c0c5a8626 100644
--- a/drivers/mtd/spi-nor/debugfs.c
+++ b/drivers/mtd/spi-nor/debugfs.c
@@ -26,6 +26,7 @@ static const char *const snor_f_names[] = {
SNOR_F_NAME(SOFT_RESET),
SNOR_F_NAME(SWP_IS_VOLATILE),
SNOR_F_NAME(RWW),
+ SNOR_F_NAME(ECC),
};
#undef SNOR_F_NAME
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index 352c40dd3864..ffeede78700d 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -332,6 +332,17 @@ static int cypress_nor_set_page_size(struct spi_nor *nor)
return 0;
}
+static void cypress_nor_ecc_init(struct spi_nor *nor)
+{
+ /*
+ * Programming is supported only in 16-byte ECC data unit granularity.
+ * Byte-programming, bit-walking, or multiple program operations to the
+ * same ECC data unit without an erase are not allowed.
+ */
+ nor->params->writesize = 16;
+ nor->flags |= SNOR_F_ECC;
+}
+
static int
s25fs256t_post_bfpt_fixup(struct spi_nor *nor,
const struct sfdp_parameter_header *bfpt_header,
@@ -373,13 +384,7 @@ static void s25fs256t_post_sfdp_fixup(struct spi_nor *nor)
static void s25fs256t_late_init(struct spi_nor *nor)
{
- /*
- * Programming is supported only in 16-byte ECC data unit granularity.
- * Byte-programming, bit-walking, or multiple program operations to the
- * same ECC data unit without an erase are not allowed. See chapter
- * 5.3.1 and 5.6 in the datasheet.
- */
- nor->params->writesize = 16;
+ cypress_nor_ecc_init(nor);
}
static struct spi_nor_fixups s25fs256t_fixups = {
@@ -431,13 +436,10 @@ static void s25hx_t_post_sfdp_fixup(struct spi_nor *nor)
static void s25hx_t_late_init(struct spi_nor *nor)
{
- struct spi_nor_flash_parameter *params = nor->params;
-
/* Fast Read 4B requires mode cycles */
- params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8;
+ nor->params->reads[SNOR_CMD_READ_FAST].num_mode_clocks = 8;
- /* The writesize should be ECC data unit size */
- params->writesize = 16;
+ cypress_nor_ecc_init(nor);
}
static struct spi_nor_fixups s25hx_t_fixups = {
@@ -506,7 +508,7 @@ static int s28hx_t_post_bfpt_fixup(struct spi_nor *nor,
static void s28hx_t_late_init(struct spi_nor *nor)
{
nor->params->octal_dtr_enable = cypress_nor_octal_dtr_enable;
- nor->params->writesize = 16;
+ cypress_nor_ecc_init(nor);
}
static const struct spi_nor_fixups s28hx_t_fixups = {
--
2.34.1
