Re: [PATCH 1/2] mtd: spi-nor: spansion: Consider reserved bits in CFR5 register

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



+Cc Dhruva

Hi Tudor,

On Tue, Jan 10 2023, Tudor Ambarus wrote:

> CFR5[6] is reserved bit and must be always 1. Set it to comply with flash
> requirements. While fixing SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_{EN, DS}
> definition, stop using magic numbers and describe the missing bit fields
> in CFR5 register. This is useful for both readability and future possible
> addition of Octal STR mode support.
>
> Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
> Cc: stable@xxxxxxxxxxxxxxx
> Reported-by: Takahiro Kuwano <Takahiro.Kuwano@xxxxxxxxxxxx>
> Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
> ---
>  drivers/mtd/spi-nor/spansion.c | 9 +++++++--
>  1 file changed, 7 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
> index b621cdfd506f..07fe0f6fdfe3 100644
> --- a/drivers/mtd/spi-nor/spansion.c
> +++ b/drivers/mtd/spi-nor/spansion.c
> @@ -21,8 +21,13 @@
>  #define SPINOR_REG_CYPRESS_CFR3V               0x00800004
>  #define SPINOR_REG_CYPRESS_CFR3V_PGSZ          BIT(4) /* Page size. */
>  #define SPINOR_REG_CYPRESS_CFR5V               0x00800006
> -#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN    0x3
> -#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS    0
> +#define SPINOR_REG_CYPRESS_CFR5_BIT6           BIT(6)

Perhaps comment here that this bit is reserved. Otherwise it is not
obvious what this does and why we are setting it without going through
git-blame. No need for a re-roll, I think it is fine if you add this
when applying.

> +#define SPINOR_REG_CYPRESS_CFR5_DDR            BIT(1)
> +#define SPINOR_REG_CYPRESS_CFR5_OPI            BIT(0)
> +#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN                            \
> +       (SPINOR_REG_CYPRESS_CFR5_BIT6 | SPINOR_REG_CYPRESS_CFR5_DDR |   \
> +        SPINOR_REG_CYPRESS_CFR5_OPI)
> +#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS    SPINOR_REG_CYPRESS_CFR5_BIT6

I would say don't fix what isn't broken. But if you do, test it. Do you
or Takahiro have a Cypress S28* flash to test this change on? If no,
then perhaps Dhruva can help here since TI uses this flash on a bunch of
their boards?

The change looks fine to me with the above comment added, I just would
like someone to test it once.

Reviewed-by: Pratyush Yadav <ptyadav@xxxxxxxxx>

>  #define SPINOR_OP_CYPRESS_RD_FAST              0xee
>
>  /* Cypress SPI NOR flash operations. */
> --
> 2.34.1
>
>

-- 
Regards,
Pratyush Yadav



Amazon Development Center Germany GmbH
Krausenstr. 38
10117 Berlin
Geschaeftsfuehrung: Christian Schlaeger, Jonathan Weiss
Eingetragen am Amtsgericht Charlottenburg unter HRB 149173 B
Sitz: Berlin
Ust-ID: DE 289 237 879






[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux