Hey, Takahiro,
On 06.01.2023 05:06, tkuw584924@xxxxxxxxx wrote:
From: Takahiro Kuwano <Takahiro.Kuwano@xxxxxxxxxxxx>
CFR5V[6] is reserved bit and must always be 1.
have you seen some strange behavior?
Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Signed-off-by: Takahiro Kuwano <Takahiro.Kuwano@xxxxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
drivers/mtd/spi-nor/spansion.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index b621cdfd506f..4e094a432d29 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -21,8 +21,8 @@
#define SPINOR_REG_CYPRESS_CFR3V 0x00800004
#define SPINOR_REG_CYPRESS_CFR3V_PGSZ BIT(4) /* Page size. */
#define SPINOR_REG_CYPRESS_CFR5V 0x00800006
-#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN 0x3
-#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS 0
+#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN 0x43
+#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS 0x40
No, this looks bad. Instead of overwriting CFR5V with whatever value, we
should instead first read it and then update only the bit that we're
interested in. If it happens to write CFR5V before octal enable/disable,
you'll overwrite the previous set values.
Cheers,
ta
