On 10/01/23 22:17, Tudor Ambarus wrote:
CFR5[6] is reserved bit and must be always 1. Set it to comply with flash
requirements. While fixing SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_{EN, DS}
definition, stop using magic numbers and describe the missing bit fields
in CFR5 register. This is useful for both readability and future possible
addition of Octal STR mode support.
Fixes: c3266af101f2 ("mtd: spi-nor: spansion: add support for Cypress Semper flash")
Cc: stable@xxxxxxxxxxxxxxx
Reported-by: Takahiro Kuwano <Takahiro.Kuwano@xxxxxxxxxxxx>
Signed-off-by: Tudor Ambarus <tudor.ambarus@xxxxxxxxxx>
---
Reviewed-by: Dhruva Gole <d-gole@xxxxxx>
drivers/mtd/spi-nor/spansion.c | 9 +++++++--
1 file changed, 7 insertions(+), 2 deletions(-)
diff --git a/drivers/mtd/spi-nor/spansion.c b/drivers/mtd/spi-nor/spansion.c
index b621cdfd506f..07fe0f6fdfe3 100644
--- a/drivers/mtd/spi-nor/spansion.c
+++ b/drivers/mtd/spi-nor/spansion.c
@@ -21,8 +21,13 @@
#define SPINOR_REG_CYPRESS_CFR3V 0x00800004
#define SPINOR_REG_CYPRESS_CFR3V_PGSZ BIT(4) /* Page size. */
#define SPINOR_REG_CYPRESS_CFR5V 0x00800006
-#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN 0x3
-#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS 0
+#define SPINOR_REG_CYPRESS_CFR5_BIT6 BIT(6)
+#define SPINOR_REG_CYPRESS_CFR5_DDR BIT(1)
+#define SPINOR_REG_CYPRESS_CFR5_OPI BIT(0)
+#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_EN \
+ (SPINOR_REG_CYPRESS_CFR5_BIT6 | SPINOR_REG_CYPRESS_CFR5_DDR | \
+ SPINOR_REG_CYPRESS_CFR5_OPI)
+#define SPINOR_REG_CYPRESS_CFR5V_OCT_DTR_DS SPINOR_REG_CYPRESS_CFR5_BIT6
#define SPINOR_OP_CYPRESS_RD_FAST 0xee
/* Cypress SPI NOR flash operations. */
--
Thanks and Regards,
Dhruva Gole
