Re: [PATCH v3 2/6] usb: dwc3: gadget: cancel requests instead of release after missed isoc

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Thinh,

On Mon, Oct 17, 2022 at 09:30:38PM +0000, Thinh Nguyen wrote:
> On Mon, Oct 17, 2022, Dan Vacura wrote:
> > From: Jeff Vanhoof <qjv001@xxxxxxxxxxxx>
> > 
> > arm-smmu related crashes seen after a Missed ISOC interrupt when
> > no_interrupt=1 is used. This can happen if the hardware is still using
> > the data associated with a TRB after the usb_request's ->complete call
> > has been made.  Instead of immediately releasing a request when a Missed
> > ISOC interrupt has occurred, this change will add logic to cancel the
> > request instead where it will eventually be released when the
> > END_TRANSFER command has completed. This logic is similar to some of the
> > cleanup done in dwc3_gadget_ep_dequeue.
> 
> This doesn't sound right. How did you determine that the hardware is
> still using the data associated with the TRB? Did you check the TRB's
> HWO bit?

The problem we're seeing was mentioned in the summary of this patch
series, issue #1. Basically, with the following patch
https://patchwork.kernel.org/project/linux-usb/patch/20210628155311.16762-6-m.grzeschik@xxxxxxxxxxxxxx/
integrated a smmu panic is occurring on our Android device with the 5.15
kernel which is:

    <3>[  718.314900][  T803] arm-smmu 15000000.apps-smmu: Unhandled arm-smmu context fault from a600000.dwc3!

The uvc gadget driver appears to be the first (and only) gadget that
uses the no_interrupt=1 logic, so this seems to be a new condition for
the dwc3 driver. In our configuration, we have up to 64 requests and the
no_interrupt=1 for up to 15 requests. The list size of dep->started_list
would get up to that amount when looping through to cleanup the
completed requests. From testing and debugging the smmu panic occurs
when a -EXDEV status shows up and right after
dwc3_gadget_ep_cleanup_completed_request() was visited. The conclusion
we had was the requests were getting returned to the gadget too early.

> 
> The dwc3 driver would only give back the requests if the TRBs of the
> associated requests are completed or when the device is disconnected.
> If the TRB indicated missed isoc, that means that the TRB is completed
> and its status was updated.

Interesting, the device is not disconnected as we don't get the
-ESHUTDOWN status back and with this patch in place things continue
after a -EXDEV status is received.

> 
> There's a special case which dwc3 may give back requests early is the
> case of the device disconnecting. The requests should be returned with
> -ESHUTDOWN, and the gadget driver shouldn't be re-using the requests on
> de-initialization anyway.
> 
> We should not issue End Transfer command just because of missed isoc. We
> may want issue End Transfer if the gadget driver is too slow and unable
> to feed requests in time (causing underrun and missed isoc) to resync
> with the host, but we already handle that.

Hmm, isn't that what happens when we get into this
condition in dwc3_gadget_endpoint_trbs_complete():

	if (usb_endpoint_xfer_isoc(dep->endpoint.desc) &&
		list_empty(&dep->started_list) &&
		(list_empty(&dep->pending_list) || status == -EXDEV))
		dwc3_stop_active_transfer(dep, true, true);

> 
> I'm still not clear what's the problem you're seeing. Do you have the
> crash log? Tracepoints?
> 
> BR,
> Thinh

Appreciate the support!

Dan



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux