From: David Jeffery <djeffery@xxxxxxxxxx> commit 0fde22c5420ed258ee538a760291c2f3935f6a01 upstream. During system shutdown or reboot, mpt3sas will reset the firmware back to ready state. However, the driver leaves running a watchdog work item intended to keep the firmware in operational state. This causes a second, unneeded reset on shutdown and moves the firmware back to operational instead of in ready state as intended. And if the mpt3sas_fwfault_debug module parameter is set, this extra reset also panics the system. mpt3sas's scsih_shutdown needs to stop the watchdog before resetting the firmware back to ready state. Link: https://lore.kernel.org/r/20220722142448.6289-1-djeffery@xxxxxxxxxx Fixes: fae21608c31c ("scsi: mpt3sas: Transition IOC to Ready state during shutdown") Tested-by: Laurence Oberman <loberman@xxxxxxxxxx> Acked-by: Sreekanth Reddy <sreekanth.reddy@xxxxxxxxxxxx> Signed-off-by: David Jeffery <djeffery@xxxxxxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx> --- drivers/scsi/mpt3sas/mpt3sas_scsih.c | 1 + 1 file changed, 1 insertion(+) --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -11386,6 +11386,7 @@ scsih_shutdown(struct pci_dev *pdev) _scsih_ir_shutdown(ioc); _scsih_nvme_shutdown(ioc); mpt3sas_base_mask_interrupts(ioc); + mpt3sas_base_stop_watchdog(ioc); ioc->shost_recovery = 1; mpt3sas_base_make_ioc_ready(ioc, SOFT_RESET); ioc->shost_recovery = 0;
