From: Linus Walleij <linus.walleij@xxxxxxxxxx>
commit c5cdb9286913aa5a5ebb81bcca0c17df3b0e2c79 upstream.
Laurence reports:
"Kernel >5.18 on Zaurus has a bug where the power management code can't
talk to devices, emitting the following errors:
sharpsl-pm sharpsl-pm: Error: AC check failed: voltage -22.
sharpsl-pm sharpsl-pm: Charging Error!
sharpsl-pm sharpsl-pm: Warning: Cannot read main battery!
Looking at the recent changes, I found that commit 31455bbda208 ("spi:
pxa2xx_spi: Convert to use GPIO descriptors") replaced the deprecated
SPI chip select platform device code with a gpiod lookup table. However,
this didn't seem to work until I changed the `dev_id` member from the
device name to the bus id. I'm not entirely sure why this is necessary,
but I suspect it is related to the fact that in sysfs SPI devices are
attached under /sys/devices/.../dev_name/spi_master/spiB/spiB.C, rather
than directly to the device."
After reviewing the change I conclude that the same fix is needed
for all affected boards.
Fixes: 31455bbda208 ("spi: pxa2xx_spi: Convert to use GPIO descriptors")
Reported-by: Laurence de Bruxelles <lfdebrux@xxxxxxxxx>
Signed-off-by: Linus Walleij <linus.walleij@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Link: https://lore.kernel.org/r/20220722114611.1517414-1-linus.walleij@xxxxxxxxxx'
Signed-off-by: Arnd Bergmann <arnd@xxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
arch/arm/mach-pxa/corgi.c | 2 +-
arch/arm/mach-pxa/hx4700.c | 2 +-
arch/arm/mach-pxa/icontrol.c | 4 ++--
arch/arm/mach-pxa/littleton.c | 2 +-
arch/arm/mach-pxa/magician.c | 2 +-
arch/arm/mach-pxa/spitz.c | 2 +-
arch/arm/mach-pxa/z2.c | 4 ++--
7 files changed, 9 insertions(+), 9 deletions(-)
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -531,7 +531,7 @@ static struct pxa2xx_spi_controller corg
};
static struct gpiod_lookup_table corgi_spi_gpio_table = {
- .dev_id = "pxa2xx-spi.1",
+ .dev_id = "spi1",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("gpio-pxa", CORGI_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
--- a/arch/arm/mach-pxa/hx4700.c
+++ b/arch/arm/mach-pxa/hx4700.c
@@ -635,7 +635,7 @@ static struct pxa2xx_spi_controller pxa_
};
static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
- .dev_id = "pxa2xx-spi.2",
+ .dev_id = "spi2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_HX4700_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
{ },
--- a/arch/arm/mach-pxa/icontrol.c
+++ b/arch/arm/mach-pxa/icontrol.c
@@ -140,7 +140,7 @@ struct platform_device pxa_spi_ssp4 = {
};
static struct gpiod_lookup_table pxa_ssp3_gpio_table = {
- .dev_id = "pxa2xx-spi.3",
+ .dev_id = "spi3",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS1, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS2, "cs", 1, GPIO_ACTIVE_LOW),
@@ -149,7 +149,7 @@ static struct gpiod_lookup_table pxa_ssp
};
static struct gpiod_lookup_table pxa_ssp4_gpio_table = {
- .dev_id = "pxa2xx-spi.4",
+ .dev_id = "spi4",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS3, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("gpio-pxa", ICONTROL_MCP251x_nCS4, "cs", 1, GPIO_ACTIVE_LOW),
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -208,7 +208,7 @@ static struct spi_board_info littleton_s
};
static struct gpiod_lookup_table littleton_spi_gpio_table = {
- .dev_id = "pxa2xx-spi.2",
+ .dev_id = "spi2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", LITTLETON_GPIO_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
{ },
--- a/arch/arm/mach-pxa/magician.c
+++ b/arch/arm/mach-pxa/magician.c
@@ -946,7 +946,7 @@ static struct pxa2xx_spi_controller magi
};
static struct gpiod_lookup_table magician_spi_gpio_table = {
- .dev_id = "pxa2xx-spi.2",
+ .dev_id = "spi2",
.table = {
/* NOTICE must be GPIO, incompatibility with hw PXA SPI framing */
GPIO_LOOKUP_IDX("gpio-pxa", GPIO14_MAGICIAN_TSC2046_CS, "cs", 0, GPIO_ACTIVE_LOW),
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -578,7 +578,7 @@ static struct pxa2xx_spi_controller spit
};
static struct gpiod_lookup_table spitz_spi_gpio_table = {
- .dev_id = "pxa2xx-spi.2",
+ .dev_id = "spi2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_ADS7846_CS, "cs", 0, GPIO_ACTIVE_LOW),
GPIO_LOOKUP_IDX("gpio-pxa", SPITZ_GPIO_LCDCON_CS, "cs", 1, GPIO_ACTIVE_LOW),
--- a/arch/arm/mach-pxa/z2.c
+++ b/arch/arm/mach-pxa/z2.c
@@ -623,7 +623,7 @@ static struct pxa2xx_spi_controller pxa_
};
static struct gpiod_lookup_table pxa_ssp1_gpio_table = {
- .dev_id = "pxa2xx-spi.1",
+ .dev_id = "spi1",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", GPIO24_ZIPITZ2_WIFI_CS, "cs", 0, GPIO_ACTIVE_LOW),
{ },
@@ -631,7 +631,7 @@ static struct gpiod_lookup_table pxa_ssp
};
static struct gpiod_lookup_table pxa_ssp2_gpio_table = {
- .dev_id = "pxa2xx-spi.2",
+ .dev_id = "spi2",
.table = {
GPIO_LOOKUP_IDX("gpio-pxa", GPIO88_ZIPITZ2_LCD_CS, "cs", 0, GPIO_ACTIVE_LOW),
{ },
