From: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
[ Upstream commit fabae667b1263216be53e0230cd3966a9a1963a4 ]
Since '8ede2ecc3e5e ("drm/msm/dp: Add DP compliance tests on Snapdragon
Chipsets")' the hpd_high member of struct dp_usbpd has been write-only.
Let's clean up the code a little bit by removing the writes as well.
Signed-off-by: Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
Reviewed-by: Stephen Boyd <swboyd@xxxxxxxxxxxx>
Link: https://lore.kernel.org/r/20211106172246.2597431-1-bjorn.andersson@xxxxxxxxxx
Signed-off-by: Rob Clark <robdclark@xxxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/gpu/drm/msm/dp/dp_display.c | 6 ------
drivers/gpu/drm/msm/dp/dp_hpd.c | 2 --
drivers/gpu/drm/msm/dp/dp_hpd.h | 2 --
3 files changed, 10 deletions(-)
diff --git a/drivers/gpu/drm/msm/dp/dp_display.c b/drivers/gpu/drm/msm/dp/dp_display.c
index 8b51a5cc3eb8..a66ee63253a3 100644
--- a/drivers/gpu/drm/msm/dp/dp_display.c
+++ b/drivers/gpu/drm/msm/dp/dp_display.c
@@ -547,11 +547,8 @@ static int dp_hpd_plug_handle(struct dp_display_private *dp, u32 data)
dp->hpd_state = ST_CONNECT_PENDING;
- hpd->hpd_high = 1;
-
ret = dp_display_usbpd_configure_cb(&dp->pdev->dev);
if (ret) { /* link train failed */
- hpd->hpd_high = 0;
dp->hpd_state = ST_DISCONNECTED;
if (ret == -ECONNRESET) { /* cable unplugged */
@@ -628,7 +625,6 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
/* triggered by irq_hdp with sink_count = 0 */
if (dp->link->sink_count == 0) {
dp_ctrl_off_phy(dp->ctrl);
- hpd->hpd_high = 0;
dp->core_initialized = false;
}
mutex_unlock(&dp->event_mutex);
@@ -652,8 +648,6 @@ static int dp_hpd_unplug_handle(struct dp_display_private *dp, u32 data)
/* disable HPD plug interrupts */
dp_catalog_hpd_config_intr(dp->catalog, DP_DP_HPD_PLUG_INT_MASK, false);
- hpd->hpd_high = 0;
-
/*
* We don't need separate work for disconnect as
* connect/attention interrupts are disabled
diff --git a/drivers/gpu/drm/msm/dp/dp_hpd.c b/drivers/gpu/drm/msm/dp/dp_hpd.c
index e1c90fa47411..db98a1d431eb 100644
--- a/drivers/gpu/drm/msm/dp/dp_hpd.c
+++ b/drivers/gpu/drm/msm/dp/dp_hpd.c
@@ -32,8 +32,6 @@ int dp_hpd_connect(struct dp_usbpd *dp_usbpd, bool hpd)
hpd_priv = container_of(dp_usbpd, struct dp_hpd_private,
dp_usbpd);
- dp_usbpd->hpd_high = hpd;
-
if (!hpd_priv->dp_cb || !hpd_priv->dp_cb->configure
|| !hpd_priv->dp_cb->disconnect) {
pr_err("hpd dp_cb not initialized\n");
diff --git a/drivers/gpu/drm/msm/dp/dp_hpd.h b/drivers/gpu/drm/msm/dp/dp_hpd.h
index 5bc5bb64680f..8feec5aa5027 100644
--- a/drivers/gpu/drm/msm/dp/dp_hpd.h
+++ b/drivers/gpu/drm/msm/dp/dp_hpd.h
@@ -26,7 +26,6 @@ enum plug_orientation {
* @multi_func: multi-function preferred
* @usb_config_req: request to switch to usb
* @exit_dp_mode: request exit from displayport mode
- * @hpd_high: Hot Plug Detect signal is high.
* @hpd_irq: Change in the status since last message
* @alt_mode_cfg_done: bool to specify alt mode status
* @debug_en: bool to specify debug mode
@@ -39,7 +38,6 @@ struct dp_usbpd {
bool multi_func;
bool usb_config_req;
bool exit_dp_mode;
- bool hpd_high;
bool hpd_irq;
bool alt_mode_cfg_done;
bool debug_en;
--
2.35.1
