On Fri, Apr 01, 2022 at 10:42:49AM -0700, Tim Harvey wrote:
> Both the GW72xx and GW73xx boards have USB1 routed to a USB OTG
> connector and USB2 routed to a USB hub.
>
> The OTG connector has over-current protection with an active-low
> pin and the USB1 to HUB connection has no over-current protection (as
> the HUB itself implements this for its downstream ports).
>
> Add proper dt nodes to specify the over-current pin polarity for USB1
> and disable over-current protection for USB2.
>
> Fixes: 6f30b27c5ef5 ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits")
> Cc: stable@xxxxxxxxxxxxxxx
> Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
Applied, thanks!
