[PATCH] ARM: dts: imx8mm-venice-gw{72xx,73xx}: fix OTG controller OC mode

[Tim Harvey <tharvey@xxxxxxxxxxxxx>]

Both the GW72xx and GW73xx boards have USB1 routed to a USB OTG
connector and USB2 routed to a USB hub.

The OTG connector has over-current protection with an active-low
pin and the USB1 to HUB connection has no over-current protection (as
the HUB itself implements this for its downstream ports).

Add proper dt nodes to specify the over-current pin polarity for USB1
and disable over-current protection for USB2.

Fixes: 6f30b27c5ef5 ("arm64: dts: imx8mm: Add Gateworks i.MX 8M Mini Development Kits")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi | 2 ++
 arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi | 2 ++
 2 files changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
index 27afa46a253a..b0de99b4a608 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw72xx.dtsi
@@ -139,12 +139,14 @@
 
 &usbotg1 {
 	dr_mode = "otg";
+	over-current-active-low;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
 	dr_mode = "host";
+	disable-over-current;
 	vbus-supply = <&reg_usb_otg2_vbus>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
index a59e849c7be2..3c26c125678d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-venice-gw73xx.dtsi
@@ -166,12 +166,14 @@
 
 &usbotg1 {
 	dr_mode = "otg";
+	over-current-active-low;
 	vbus-supply = <&reg_usb_otg1_vbus>;
 	status = "okay";
 };
 
 &usbotg2 {
 	dr_mode = "host";
+	disable-over-current;
 	vbus-supply = <&reg_usb_otg2_vbus>;
 	status = "okay";
 };
-- 
2.17.1