From: Todd Fujinaka <todd.fujinaka@xxxxxxxxx>
On some devices, the internal PLL circuit occasionally provides the
wrong clock frequency after power up. The probability of failure is less
than one failure per 1000 power cycles. When the failure occurs, the
internal clock frequency is around 1/20 of the correct frequency.
Cc: stable <stable@xxxxxxxxxxxxxxx>
Signed-off-by: Todd Fujinaka <todd.fujinaka@xxxxxxxxx>
Tested-by: Aaron Brown <aaron.f.brown@xxxxxxxxx>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@xxxxxxxxx>
---
drivers/net/ethernet/intel/igb/e1000_82575.c | 7 +++
drivers/net/ethernet/intel/igb/e1000_defines.h | 18 +++----
drivers/net/ethernet/intel/igb/e1000_hw.h | 3 ++
drivers/net/ethernet/intel/igb/e1000_i210.c | 66 ++++++++++++++++++++++++++
drivers/net/ethernet/intel/igb/e1000_i210.h | 12 +++++
drivers/net/ethernet/intel/igb/e1000_regs.h | 1 +
drivers/net/ethernet/intel/igb/igb_main.c | 14 ++++++
7 files changed, 113 insertions(+), 8 deletions(-)
diff --git a/drivers/net/ethernet/intel/igb/e1000_82575.c b/drivers/net/ethernet/intel/igb/e1000_82575.c
index a2db388..ee74f95 100644
--- a/drivers/net/ethernet/intel/igb/e1000_82575.c
+++ b/drivers/net/ethernet/intel/igb/e1000_82575.c
@@ -1481,6 +1481,13 @@ static s32 igb_init_hw_82575(struct e1000_hw *hw)
s32 ret_val;
u16 i, rar_count = mac->rar_entry_count;
+ if ((hw->mac.type >= e1000_i210) &&
+ !(igb_get_flash_presence_i210(hw))) {
+ ret_val = igb_pll_workaround_i210(hw);
+ if (ret_val)
+ return ret_val;
+ }
+
/* Initialize identification LED */
ret_val = igb_id_led_init(hw);
if (ret_val) {
diff --git a/drivers/net/ethernet/intel/igb/e1000_defines.h b/drivers/net/ethernet/intel/igb/e1000_defines.h
index 2a8bb35..217f813 100644
--- a/drivers/net/ethernet/intel/igb/e1000_defines.h
+++ b/drivers/net/ethernet/intel/igb/e1000_defines.h
@@ -46,14 +46,15 @@
#define E1000_CTRL_EXT_SDP3_DIR 0x00000800 /* SDP3 Data direction */
/* Physical Func Reset Done Indication */
-#define E1000_CTRL_EXT_PFRSTD 0x00004000
-#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
-#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000
-#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
-#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
-#define E1000_CTRL_EXT_EIAME 0x01000000
-#define E1000_CTRL_EXT_IRCA 0x00000001
+#define E1000_CTRL_EXT_PFRSTD 0x00004000
+#define E1000_CTRL_EXT_SDLPE 0X00040000 /* SerDes Low Power Enable */
+#define E1000_CTRL_EXT_LINK_MODE_MASK 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_PCIE_SERDES 0x00C00000
+#define E1000_CTRL_EXT_LINK_MODE_1000BASE_KX 0x00400000
+#define E1000_CTRL_EXT_LINK_MODE_SGMII 0x00800000
+#define E1000_CTRL_EXT_LINK_MODE_GMII 0x00000000
+#define E1000_CTRL_EXT_EIAME 0x01000000
+#define E1000_CTRL_EXT_IRCA 0x00000001
/* Interrupt delay cancellation */
/* Driver loaded bit for FW */
#define E1000_CTRL_EXT_DRV_LOAD 0x10000000
@@ -62,6 +63,7 @@
/* packet buffer parity error detection enabled */
/* descriptor FIFO parity error detection enable */
#define E1000_CTRL_EXT_PBA_CLR 0x80000000 /* PBA Clear */
+#define E1000_CTRL_EXT_PHYPDEN 0x00100000
#define E1000_I2CCMD_REG_ADDR_SHIFT 16
#define E1000_I2CCMD_PHY_ADDR_SHIFT 24
#define E1000_I2CCMD_OPCODE_READ 0x08000000
diff --git a/drivers/net/ethernet/intel/igb/e1000_hw.h b/drivers/net/ethernet/intel/igb/e1000_hw.h
index 89925e4..ce55ea5 100644
--- a/drivers/net/ethernet/intel/igb/e1000_hw.h
+++ b/drivers/net/ethernet/intel/igb/e1000_hw.h
@@ -567,4 +567,7 @@ struct net_device *igb_get_hw_dev(struct e1000_hw *hw);
/* These functions must be implemented by drivers */
s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
s32 igb_write_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value);
+
+void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value);
+void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value);
#endif /* _E1000_HW_H_ */
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.c b/drivers/net/ethernet/intel/igb/e1000_i210.c
index 337161f..65d9316 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.c
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.c
@@ -834,3 +834,69 @@ s32 igb_init_nvm_params_i210(struct e1000_hw *hw)
}
return ret_val;
}
+
+/**
+ * igb_pll_workaround_i210
+ * @hw: pointer to the HW structure
+ *
+ * Works around an errata in the PLL circuit where it occasionally
+ * provides the wrong clock frequency after power up.
+ **/
+s32 igb_pll_workaround_i210(struct e1000_hw *hw)
+{
+ s32 ret_val;
+ u32 wuc, mdicnfg, ctrl, ctrl_ext, reg_val;
+ u16 nvm_word, phy_word, pci_word, tmp_nvm;
+ int i;
+
+ /* Get and set needed register values */
+ wuc = rd32(E1000_WUC);
+ mdicnfg = rd32(E1000_MDICNFG);
+ reg_val = mdicnfg & ~E1000_MDICNFG_EXT_MDIO;
+ wr32(E1000_MDICNFG, reg_val);
+
+ /* Get data from NVM, or set default */
+ ret_val = igb_read_invm_word_i210(hw, E1000_INVM_AUTOLOAD,
+ &nvm_word);
+ if (ret_val)
+ nvm_word = E1000_INVM_DEFAULT_AL;
+ tmp_nvm = nvm_word | E1000_INVM_PLL_WO_VAL;
+ for (i = 0; i < E1000_MAX_PLL_TRIES; i++) {
+ /* check current state directly from internal PHY */
+ igb_read_phy_reg_gs40g(hw, (E1000_PHY_PLL_FREQ_PAGE |
+ E1000_PHY_PLL_FREQ_REG), &phy_word);
+ if ((phy_word & E1000_PHY_PLL_UNCONF)
+ != E1000_PHY_PLL_UNCONF) {
+ ret_val = 0;
+ break;
+ } else {
+ ret_val = -E1000_ERR_PHY;
+ }
+ /* directly reset the internal PHY */
+ ctrl = rd32(E1000_CTRL);
+ wr32(E1000_CTRL, ctrl|E1000_CTRL_PHY_RST);
+
+ ctrl_ext = rd32(E1000_CTRL_EXT);
+ ctrl_ext |= (E1000_CTRL_EXT_PHYPDEN | E1000_CTRL_EXT_SDLPE);
+ wr32(E1000_CTRL_EXT, ctrl_ext);
+
+ wr32(E1000_WUC, 0);
+ reg_val = (E1000_INVM_AUTOLOAD << 4) | (tmp_nvm << 16);
+ wr32(E1000_EEARBC_I210, reg_val);
+
+ igb_read_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ pci_word |= E1000_PCI_PMCSR_D3;
+ igb_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ usleep_range(1000, 2000);
+ pci_word &= ~E1000_PCI_PMCSR_D3;
+ igb_write_pci_cfg(hw, E1000_PCI_PMCSR, &pci_word);
+ reg_val = (E1000_INVM_AUTOLOAD << 4) | (nvm_word << 16);
+ wr32(E1000_EEARBC_I210, reg_val);
+
+ /* restore WUC register */
+ wr32(E1000_WUC, wuc);
+ }
+ /* restore MDICNFG setting */
+ wr32(E1000_MDICNFG, mdicnfg);
+ return ret_val;
+}
diff --git a/drivers/net/ethernet/intel/igb/e1000_i210.h b/drivers/net/ethernet/intel/igb/e1000_i210.h
index 9f34976..3442b63 100644
--- a/drivers/net/ethernet/intel/igb/e1000_i210.h
+++ b/drivers/net/ethernet/intel/igb/e1000_i210.h
@@ -33,6 +33,7 @@ s32 igb_read_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 *data);
s32 igb_write_xmdio_reg(struct e1000_hw *hw, u16 addr, u8 dev_addr, u16 data);
s32 igb_init_nvm_params_i210(struct e1000_hw *hw);
bool igb_get_flash_presence_i210(struct e1000_hw *hw);
+s32 igb_pll_workaround_i210(struct e1000_hw *hw);
#define E1000_STM_OPCODE 0xDB00
#define E1000_EEPROM_FLASH_SIZE_WORD 0x11
@@ -78,4 +79,15 @@ enum E1000_INVM_STRUCTURE_TYPE {
#define NVM_LED_1_CFG_DEFAULT_I211 0x0184
#define NVM_LED_0_2_CFG_DEFAULT_I211 0x200C
+/* PLL Defines */
+#define E1000_PCI_PMCSR 0x44
+#define E1000_PCI_PMCSR_D3 0x03
+#define E1000_MAX_PLL_TRIES 5
+#define E1000_PHY_PLL_UNCONF 0xFF
+#define E1000_PHY_PLL_FREQ_PAGE 0xFC0000
+#define E1000_PHY_PLL_FREQ_REG 0x000E
+#define E1000_INVM_DEFAULT_AL 0x202F
+#define E1000_INVM_AUTOLOAD 0x0A
+#define E1000_INVM_PLL_WO_VAL 0x0010
+
#endif
diff --git a/drivers/net/ethernet/intel/igb/e1000_regs.h b/drivers/net/ethernet/intel/igb/e1000_regs.h
index 1cc4b1a7..f5ba4e4 100644
--- a/drivers/net/ethernet/intel/igb/e1000_regs.h
+++ b/drivers/net/ethernet/intel/igb/e1000_regs.h
@@ -66,6 +66,7 @@
#define E1000_PBA 0x01000 /* Packet Buffer Allocation - RW */
#define E1000_PBS 0x01008 /* Packet Buffer Size */
#define E1000_EEMNGCTL 0x01010 /* MNG EEprom Control */
+#define E1000_EEARBC_I210 0x12024 /* EEPROM Auto Read Bus Control */
#define E1000_EEWR 0x0102C /* EEPROM Write Register - RW */
#define E1000_I2CCMD 0x01028 /* SFPI2C Command Register - RW */
#define E1000_FRTIMER 0x01048 /* Free Running Timer - RW */
diff --git a/drivers/net/ethernet/intel/igb/igb_main.c b/drivers/net/ethernet/intel/igb/igb_main.c
index f145adb..57a96e0 100644
--- a/drivers/net/ethernet/intel/igb/igb_main.c
+++ b/drivers/net/ethernet/intel/igb/igb_main.c
@@ -7215,6 +7215,20 @@ static int igb_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd)
}
}
+void igb_read_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ pci_read_config_word(adapter->pdev, reg, value);
+}
+
+void igb_write_pci_cfg(struct e1000_hw *hw, u32 reg, u16 *value)
+{
+ struct igb_adapter *adapter = hw->back;
+
+ pci_write_config_word(adapter->pdev, reg, *value);
+}
+
s32 igb_read_pcie_cap_reg(struct e1000_hw *hw, u32 reg, u16 *value)
{
struct igb_adapter *adapter = hw->back;
--
1.9.3
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html