This is a note to let you know that I've just added the patch titled
ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatile
to the 3.14-stable tree which can be found at:
http://www.kernel.org/git/?p=linux/kernel/git/stable/stable-queue.git;a=summary
The filename of the patch is:
asoc-wm8962-update-register-class_d_control_1-to-be-non-volatile.patch
and it can be found in the queue-3.14 subdirectory.
If you, or anyone else, feels it should not be added to the stable tree,
please let <stable@xxxxxxxxxxxxxxx> know about it.
>From 44330ab516c15dda8a1e660eeaf0003f84e43e3f Mon Sep 17 00:00:00 2001
From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Date: Tue, 13 May 2014 13:45:15 +0100
Subject: ASoC: wm8962: Update register CLASS_D_CONTROL_1 to be non-volatile
From: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
commit 44330ab516c15dda8a1e660eeaf0003f84e43e3f upstream.
The register CLASS_D_CONTROL_1 is marked as volatile because it contains
a bit, DAC_MUTE, which is also mirrored in the ADC_DAC_CONTROL_1
register. This causes problems for the "Speaker Switch" control, which
will report an error if the CODEC is suspended because it relies on a
volatile register.
To resolve this issue mark CLASS_D_CONTROL_1 as non-volatile and
manually keep the register cache in sync by updating both bits when
changing the mute status.
Reported-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
Tested-by: Shawn Guo <shawn.guo@xxxxxxxxxx>
Signed-off-by: Mark Brown <broonie@xxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
sound/soc/codecs/wm8962.c | 15 ++++++++++++---
sound/soc/codecs/wm8962.h | 4 ++++
2 files changed, 16 insertions(+), 3 deletions(-)
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -154,6 +154,7 @@ static struct reg_default wm8962_reg[] =
{ 40, 0x0000 }, /* R40 - SPKOUTL volume */
{ 41, 0x0000 }, /* R41 - SPKOUTR volume */
+ { 49, 0x0010 }, /* R49 - Class D Control 1 */
{ 51, 0x0003 }, /* R51 - Class D Control 2 */
{ 56, 0x0506 }, /* R56 - Clocking 4 */
@@ -795,7 +796,6 @@ static bool wm8962_volatile_register(str
case WM8962_ALC2:
case WM8962_THERMAL_SHUTDOWN_STATUS:
case WM8962_ADDITIONAL_CONTROL_4:
- case WM8962_CLASS_D_CONTROL_1:
case WM8962_DC_SERVO_6:
case WM8962_INTERRUPT_STATUS_1:
case WM8962_INTERRUPT_STATUS_2:
@@ -2922,13 +2922,22 @@ static int wm8962_set_fll(struct snd_soc
static int wm8962_mute(struct snd_soc_dai *dai, int mute)
{
struct snd_soc_codec *codec = dai->codec;
- int val;
+ int val, ret;
if (mute)
- val = WM8962_DAC_MUTE;
+ val = WM8962_DAC_MUTE | WM8962_DAC_MUTE_ALT;
else
val = 0;
+ /**
+ * The DAC mute bit is mirrored in two registers, update both to keep
+ * the register cache consistent.
+ */
+ ret = snd_soc_update_bits(codec, WM8962_CLASS_D_CONTROL_1,
+ WM8962_DAC_MUTE_ALT, val);
+ if (ret < 0)
+ return ret;
+
return snd_soc_update_bits(codec, WM8962_ADC_DAC_CONTROL_1,
WM8962_DAC_MUTE, val);
}
--- a/sound/soc/codecs/wm8962.h
+++ b/sound/soc/codecs/wm8962.h
@@ -1954,6 +1954,10 @@
#define WM8962_SPKOUTL_ENA_MASK 0x0040 /* SPKOUTL_ENA */
#define WM8962_SPKOUTL_ENA_SHIFT 6 /* SPKOUTL_ENA */
#define WM8962_SPKOUTL_ENA_WIDTH 1 /* SPKOUTL_ENA */
+#define WM8962_DAC_MUTE_ALT 0x0010 /* DAC_MUTE */
+#define WM8962_DAC_MUTE_ALT_MASK 0x0010 /* DAC_MUTE */
+#define WM8962_DAC_MUTE_ALT_SHIFT 4 /* DAC_MUTE */
+#define WM8962_DAC_MUTE_ALT_WIDTH 1 /* DAC_MUTE */
#define WM8962_SPKOUTL_PGA_MUTE 0x0002 /* SPKOUTL_PGA_MUTE */
#define WM8962_SPKOUTL_PGA_MUTE_MASK 0x0002 /* SPKOUTL_PGA_MUTE */
#define WM8962_SPKOUTL_PGA_MUTE_SHIFT 1 /* SPKOUTL_PGA_MUTE */
Patches currently in stable-queue which might be from ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx are
queue-3.14/asoc-wm8962-update-register-class_d_control_1-to-be-non-volatile.patch
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html