Since the Hamming software ECC engine has been updated to become a
proper and independent ECC engine, it is now mandatory to either
initialize the engine before using any one of his functions or use one
of the bare helpers which only perform the calculations. As there is no
actual need for a proper ECC initialization, let's just use the bare
helper instead of the rawnand one.
Fixes: 90ccf0a0192f ("mtd: nand: ecc-hamming: Rename the exported functions")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
drivers/mtd/nand/raw/ndfc.c | 12 +++++++++++-
1 file changed, 11 insertions(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/raw/ndfc.c b/drivers/mtd/nand/raw/ndfc.c
index 338d6b1a189e..98d5a94c3a24 100644
--- a/drivers/mtd/nand/raw/ndfc.c
+++ b/drivers/mtd/nand/raw/ndfc.c
@@ -22,6 +22,7 @@
#include <linux/mtd/ndfc.h>
#include <linux/slab.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
#include <linux/of_address.h>
#include <linux/of_platform.h>
#include <asm/io.h>
@@ -100,6 +101,15 @@ static int ndfc_calculate_ecc(struct nand_chip *chip,
return 0;
}
+static int ndfc_correct_ecc(struct nand_chip *chip,
+ unsigned char *buf,
+ unsigned char *read_ecc,
+ unsigned char *calc_ecc)
+{
+ return ecc_sw_hamming_correct(buf, read_ecc, calc_ecc,
+ chip->ecc.size, false);
+}
+
/*
* Speedups for buffer read/write/verify
*
@@ -145,7 +155,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
chip->controller = &ndfc->ndfc_control;
chip->legacy.read_buf = ndfc_read_buf;
chip->legacy.write_buf = ndfc_write_buf;
- chip->ecc.correct = rawnand_sw_hamming_correct;
+ chip->ecc.correct = ndfc_correct_ecc;
chip->ecc.hwctl = ndfc_enable_hwecc;
chip->ecc.calculate = ndfc_calculate_ecc;
chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
--
2.27.0
