Since the Hamming software ECC engine has been updated to become a
proper and independent ECC engine, it is now mandatory to either
initialize the engine before using any one of his functions or use one
of the bare helpers which only perform the calculations. As there is no
actual need for a proper ECC initialization, let's just use the bare
helper instead of the rawnand one.
Fixes: 90ccf0a0192f ("mtd: nand: ecc-hamming: Rename the exported functions")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
drivers/mtd/nand/raw/tmio_nand.c | 8 +++++---
1 file changed, 5 insertions(+), 3 deletions(-)
diff --git a/drivers/mtd/nand/raw/tmio_nand.c b/drivers/mtd/nand/raw/tmio_nand.c
index de8e919d0ebe..6d93dd31969b 100644
--- a/drivers/mtd/nand/raw/tmio_nand.c
+++ b/drivers/mtd/nand/raw/tmio_nand.c
@@ -34,6 +34,7 @@
#include <linux/interrupt.h>
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand-ecc-sw-hamming.h>
#include <linux/mtd/rawnand.h>
#include <linux/mtd/partitions.h>
#include <linux/slab.h>
@@ -292,11 +293,12 @@ static int tmio_nand_correct_data(struct nand_chip *chip, unsigned char *buf,
int r0, r1;
/* assume ecc.size = 512 and ecc.bytes = 6 */
- r0 = rawnand_sw_hamming_correct(chip, buf, read_ecc, calc_ecc);
+ r0 = ecc_sw_hamming_correct(buf, read_ecc, calc_ecc,
+ chip->ecc.size, false);
if (r0 < 0)
return r0;
- r1 = rawnand_sw_hamming_correct(chip, buf + 256, read_ecc + 3,
- calc_ecc + 3);
+ r1 = ecc_sw_hamming_correct(buf + 256, read_ecc + 3, calc_ecc + 3,
+ chip->ecc.size, false);
if (r1 < 0)
return r1;
return r0 + r1;
--
2.27.0
