Re: [PATCH 1/2] net: dsa: lantiq_gswip: Enable GSWIP_MII_CFG_EN also for internal PHYs

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sun, 3 Jan 2021 03:12:21 +0100 Martin Blumenstingl wrote:
> Hi Andrew,
> 
> On Sun, Jan 3, 2021 at 3:09 AM Andrew Lunn <andrew@xxxxxxx> wrote:
> >
> > On Sun, Jan 03, 2021 at 02:25:43AM +0100, Martin Blumenstingl wrote:  
> > > Enable GSWIP_MII_CFG_EN also for internal PHYs to make traffic flow.
> > > Without this the PHY link is detected properly and ethtool statistics
> > > for TX are increasing but there's no RX traffic coming in.
> > >
> > > Fixes: 14fceff4771e51 ("net: dsa: Add Lantiq / Intel DSA driver for vrx200")
> > > Cc: stable@xxxxxxxxxxxxxxx  
> >
> > Hi Martin
> >
> > No need to Cc: stable. David or Jakub will handle the backport to
> > stable.  You should however set the subject to [PATCH net 1/2] and
> > base the patches on the net tree, not net-next.  
> do you recommend re-sending these patches and changing the subject?
> the lantiq_gswip.c driver is identical in -net and -net-next and so
> the patch will apply fine in both cases

Resend is pretty much always a safe bet. But since as you said trees 
are identical at the moment I made an exception applied as is :)

Thanks everyone!



[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]

  Powered by Linux