From: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx> [ Upstream commit bafcc61d998c1ca18f556d92a0e95335ac68c7da ] "make ARCH=microblaze help" mentions simpleImage.<dt>.unstrip, but it is not a real Make target. It does not work because Makefile assumes "system.unstrip" is the name of DT. $ make ARCH=microblaze CROSS_COMPILE=microblaze-linux- simpleImage.system.unstrip [ snip ] make[1]: *** No rule to make target 'arch/microblaze/boot/dts/system.unstrip.dtb', needed by 'arch/microblaze/boot/dts/system.dtb'. Stop. make: *** [Makefile;1060: arch/microblaze/boot/dts] Error 2 make: *** Waiting for unfinished jobs.... simpleImage.<dt> works like a phony target that generates multiple images. Reflect the real behavior. I removed the DT directory path information because it is already explained a few lines below. While I am here, I deleted the redundant *_defconfig explanation. The top-level Makefile caters to list available defconfig files: mmu_defconfig - Build for mmu nommu_defconfig - Build for nommu Signed-off-by: Masahiro Yamada <yamada.masahiro@xxxxxxxxxxxxx> Signed-off-by: Michal Simek <michal.simek@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- arch/microblaze/Makefile | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile index 740f2b82a182a..5e1e18540a571 100644 --- a/arch/microblaze/Makefile +++ b/arch/microblaze/Makefile @@ -83,11 +83,11 @@ define archhelp echo '* linux.bin - Create raw binary' echo ' linux.bin.gz - Create compressed raw binary' echo ' linux.bin.ub - Create U-Boot wrapped raw binary' - echo ' simpleImage.<dt> - ELF image with $(arch)/boot/dts/<dt>.dts linked in' - echo ' - stripped elf with fdt blob' - echo ' simpleImage.<dt>.unstrip - full ELF image with fdt blob' - echo ' *_defconfig - Select default config from arch/microblaze/configs' - echo '' + echo ' simpleImage.<dt> - Create the following images with <dt>.dtb linked in' + echo ' simpleImage.<dt> : raw image' + echo ' simpleImage.<dt>.ub : raw image with U-Boot header' + echo ' simpleImage.<dt>.unstrip: ELF (identical to vmlinux)' + echo ' simpleImage.<dt>.strip : stripped ELF' echo ' Targets with <dt> embed a device tree blob inside the image' echo ' These targets support board with firmware that does not' echo ' support passing a device tree directly. Replace <dt> with the' -- 2.20.1
