From: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
[ Upstream commit 732774437ae01d9882e60314e303898e63c7f038 ]
The opcodes used by the controller when doing batched page prog should
be written in NFC_REG_WCMD_SET not FC_REG_RCMD_SET. Luckily, the
default NFC_REG_WCMD_SET value matches the one we set in the driver
which explains why we didn't notice the problem.
Fixes: 614049a8d904 ("mtd: nand: sunxi: add support for DMA assisted operations")
Signed-off-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxx>
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx>
---
drivers/mtd/nand/sunxi_nand.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/mtd/nand/sunxi_nand.c b/drivers/mtd/nand/sunxi_nand.c
index e26c4f880df66..886355bfa7617 100644
--- a/drivers/mtd/nand/sunxi_nand.c
+++ b/drivers/mtd/nand/sunxi_nand.c
@@ -1420,7 +1420,7 @@ static int sunxi_nfc_hw_ecc_write_page_dma(struct mtd_info *mtd,
sunxi_nfc_randomizer_enable(mtd);
writel((NAND_CMD_RNDIN << 8) | NAND_CMD_PAGEPROG,
- nfc->regs + NFC_REG_RCMD_SET);
+ nfc->regs + NFC_REG_WCMD_SET);
dma_async_issue_pending(nfc->dmac);
--
2.20.1
