From: Florian Fainelli <f.fainelli@xxxxxxxxx>
[ Upstream commit 5fc0f21246e50afdf318b5a3a941f7f4f57b8947 ]
Since it became possible for the DSA core to use a CPU port different
than 8, our bcm_sf2_imp_setup() function was broken because it assumes
that registers are applicable to port 8. In particular, the port's MAC
is going to stay disabled, so make sure we clear the RX_DIS and TX_DIS
bits if we are not configured for port 8.
Fixes: 9f91484f6fcc ("net: dsa: make "label" property optional for dsa2")
Signed-off-by: Florian Fainelli <f.fainelli@xxxxxxxxx>
Signed-off-by: David S. Miller <davem@xxxxxxxxxxxxx>
Signed-off-by: Greg Kroah-Hartman <gregkh@xxxxxxxxxxxxxxxxxxx>
---
drivers/net/dsa/bcm_sf2.c | 36 +++++++++++++++++++++---------------
1 file changed, 21 insertions(+), 15 deletions(-)
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -106,22 +106,11 @@ static void bcm_sf2_imp_setup(struct dsa
unsigned int i;
u32 reg, offset;
- if (priv->type == BCM7445_DEVICE_ID)
- offset = CORE_STS_OVERRIDE_IMP;
- else
- offset = CORE_STS_OVERRIDE_IMP2;
-
/* Enable the port memories */
reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
reg &= ~P_TXQ_PSM_VDD(port);
core_writel(priv, reg, CORE_MEM_PSM_VDD_CTRL);
- /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
- reg = core_readl(priv, CORE_IMP_CTL);
- reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
- reg &= ~(RX_DIS | TX_DIS);
- core_writel(priv, reg, CORE_IMP_CTL);
-
/* Enable forwarding */
core_writel(priv, SW_FWDG_EN, CORE_SWMODE);
@@ -140,10 +129,27 @@ static void bcm_sf2_imp_setup(struct dsa
bcm_sf2_brcm_hdr_setup(priv, port);
- /* Force link status for IMP port */
- reg = core_readl(priv, offset);
- reg |= (MII_SW_OR | LINK_STS);
- core_writel(priv, reg, offset);
+ if (port == 8) {
+ if (priv->type == BCM7445_DEVICE_ID)
+ offset = CORE_STS_OVERRIDE_IMP;
+ else
+ offset = CORE_STS_OVERRIDE_IMP2;
+
+ /* Force link status for IMP port */
+ reg = core_readl(priv, offset);
+ reg |= (MII_SW_OR | LINK_STS);
+ core_writel(priv, reg, offset);
+
+ /* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
+ reg = core_readl(priv, CORE_IMP_CTL);
+ reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
+ reg &= ~(RX_DIS | TX_DIS);
+ core_writel(priv, reg, CORE_IMP_CTL);
+ } else {
+ reg = core_readl(priv, CORE_G_PCTL_PORT(port));
+ reg &= ~(RX_DIS | TX_DIS);
+ core_writel(priv, reg, CORE_G_PCTL_PORT(port));
+ }
}
static void bcm_sf2_eee_enable_set(struct dsa_switch *ds, int port, bool enable)
