From: Bodo Stroesser <bstroesser@xxxxxxxxxxxxxx> [ Upstream commit 27e84243cb63601a10e366afe3e2d05bb03c1cb5 ] passthrough_parse_cdb() - used by TCMU and PSCSI - attepts to reset the LUN field of SCSI-2 CDBs (bits 5,6,7 of byte 1). The current code is wrong as for newer commands not having the LUN field it overwrites relevant command bits (e.g. for SECURITY PROTOCOL IN / OUT). We think this code was unnecessary from the beginning or at least it is no longer useful. So we remove it entirely. Link: https://lore.kernel.org/r/12498eab-76fd-eaad-1316-c2827badb76a@xxxxxxxxxxxxxx Signed-off-by: Bodo Stroesser <bstroesser@xxxxxxxxxxxxxx> Reviewed-by: Bart Van Assche <bvanassche@xxxxxxx> Reviewed-by: Hannes Reinecke <hare@xxxxxxxx> Signed-off-by: Martin K. Petersen <martin.petersen@xxxxxxxxxx> Signed-off-by: Sasha Levin <sashal@xxxxxxxxxx> --- drivers/target/target_core_device.c | 21 --------------------- 1 file changed, 21 deletions(-) diff --git a/drivers/target/target_core_device.c b/drivers/target/target_core_device.c index cc38a3509f78c..c3d576ed6f135 100644 --- a/drivers/target/target_core_device.c +++ b/drivers/target/target_core_device.c @@ -1046,27 +1046,6 @@ passthrough_parse_cdb(struct se_cmd *cmd, { unsigned char *cdb = cmd->t_task_cdb; - /* - * Clear a lun set in the cdb if the initiator talking to use spoke - * and old standards version, as we can't assume the underlying device - * won't choke up on it. - */ - switch (cdb[0]) { - case READ_10: /* SBC - RDProtect */ - case READ_12: /* SBC - RDProtect */ - case READ_16: /* SBC - RDProtect */ - case SEND_DIAGNOSTIC: /* SPC - SELF-TEST Code */ - case VERIFY: /* SBC - VRProtect */ - case VERIFY_16: /* SBC - VRProtect */ - case WRITE_VERIFY: /* SBC - VRProtect */ - case WRITE_VERIFY_12: /* SBC - VRProtect */ - case MAINTENANCE_IN: /* SPC - Parameter Data Format for SA RTPG */ - break; - default: - cdb[1] &= 0x1f; /* clear logical unit number */ - break; - } - /* * For REPORT LUNS we always need to emulate the response, for everything * else, pass it up. -- 2.20.1
