Re: [PATCH] ata: sata_mv: setting PHY speed according to SControl speed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Dec 31, 2013 at 07:12:14AM -0500, Tejun Heo wrote:
> On Mon, Dec 23, 2013 at 01:07:35PM +0100, Simon Guinot wrote:
> > @@ -1358,6 +1359,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
> >  
> >  	if (ofs != 0xffffffffU) {
> >  		void __iomem *addr = mv_ap_base(link->ap) + ofs;
> > +		void __iomem *lp_phy_addr = mv_ap_base(link->ap) + LP_PHY_CTL;
> >  		if (sc_reg_in == SCR_CONTROL) {
> >  			/*
> >  			 * Workaround for 88SX60x1 FEr SATA#26:
> > @@ -1374,6 +1376,14 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
> >  			 */
> >  			if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1)
> >  				val |= 0xf000;
> > +
> > +			/*
> > +			 * Setting PHY speed according to SControl speed
> > +			 */
> > +			if ((val & 0xf0) == 0x10)
> > +				writelfl(0x7, lp_phy_addr);
> > +			else
> > +				writelfl(0x227, lp_phy_addr);
> 
> Do we know that this is safe for all sata_mvs?  If other sata_mvs
> haven't had the described issue, maybe this should be applied
> selectively to the said soc?  I'd actually prefer to avoid such
> conditionals but we need to confirm this is okay for other
> implementations.

Hi Tejun

I've tested on Kirkwood, and not had problems. But i agree with
you. We need somebody in Marvell to say this is safe with all sata_mv
variants.

Lior, can you comment?

Thanks
	Andrew
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]