[PATCH] ata: sata_mv: setting PHY speed according to SControl speed

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Lior Amsalem <alior@xxxxxxxxxxx>

From: Lior Amsalem <alior@xxxxxxxxxxx>

This patch fixes a SATA hotplug issue on the Armada 370 and Armada XP
SoCs. Without it, if a disk is unplugged from a SATA port, then further
hotplug notification are now longer received on this port.

This should be applied to every -stable kernel supporting Armada SoCs.

Signed-off-by: Lior Amsalem <alior@xxxxxxxxxxx>
Signed-off-by: Nadav Haklai <nadavh@xxxxxxxxxxx>
Signed-off-by: Simon Guinot <simon.guinot@xxxxxxxxxxxx>
Cc: Thomas Petazzoni <thomas.petazzoni@xxxxxxxxxxxxxxxxxx>
Cc: Jason Cooper <jason@xxxxxxxxxxxxxx>
Cc: Andrew Lunn <andrew@xxxxxxx>
Cc: Gregory Clement <gregory.clement@xxxxxxxxxxxxxxxxxx>
Cc: Sebastian Hesselbarth <sebastian.hesselbarth@xxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
---
 drivers/ata/sata_mv.c | 10 ++++++++++
 1 file changed, 10 insertions(+)

diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 56be318..89ca472 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -304,6 +304,7 @@ enum {
 	MV5_LTMODE		= 0x30,
 	MV5_PHY_CTL		= 0x0C,
 	SATA_IFCFG		= 0x050,
+	LP_PHY_CTL		= 0x058,
 
 	MV_M2_PREAMP_MASK	= 0x7e0,
 
@@ -1358,6 +1359,7 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
 
 	if (ofs != 0xffffffffU) {
 		void __iomem *addr = mv_ap_base(link->ap) + ofs;
+		void __iomem *lp_phy_addr = mv_ap_base(link->ap) + LP_PHY_CTL;
 		if (sc_reg_in == SCR_CONTROL) {
 			/*
 			 * Workaround for 88SX60x1 FEr SATA#26:
@@ -1374,6 +1376,14 @@ static int mv_scr_write(struct ata_link *link, unsigned int sc_reg_in, u32 val)
 			 */
 			if ((val & 0xf) == 1 || (readl(addr) & 0xf) == 1)
 				val |= 0xf000;
+
+			/*
+			 * Setting PHY speed according to SControl speed
+			 */
+			if ((val & 0xf0) == 0x10)
+				writelfl(0x7, lp_phy_addr);
+			else
+				writelfl(0x227, lp_phy_addr);
 		}
 		writelfl(val, addr);
 		return 0;
-- 
1.8.5.1

--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Linux Kernel]     [Kernel Development Newbies]     [Linux USB Devel]     [Video for Linux]     [Linux Audio Users]     [Yosemite Hiking]     [Linux Kernel]     [Linux SCSI]