On Mon, 8 Apr 2019 10:31:45 +0200
Miquel Raynal <miquel.raynal@xxxxxxxxxxx> wrote:
> Since the migration of the driver to stop using the legacy
> ->select_chip() hook, there is nothing deselecting the target anymore,
> thus the selection is not forced at the next access. Ensure the ND_RUN
> bit and the interrupts are always in a clean state.
>
> Cc: Daniel Mack <daniel@xxxxxxxxxx>
> Cc: stable@xxxxxxxxxxxxxxx
> Fixes: b25251414f6e00 ("mtd: rawnand: marvell: Stop implementing ->select_chip()")
> Suggested-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
> Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
Reviewed-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
> ---
>
> Changes in v2:
> * Also include the reset of the interrupts each time
> marvell_nfc_select_target() is called.
>
> drivers/mtd/nand/raw/marvell_nand.c | 12 ++++++------
> 1 file changed, 6 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
> index f38e5c1b87e4..d984538980e2 100644
> --- a/drivers/mtd/nand/raw/marvell_nand.c
> +++ b/drivers/mtd/nand/raw/marvell_nand.c
> @@ -722,12 +722,6 @@ static void marvell_nfc_select_target(struct nand_chip *chip,
> struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
> u32 ndcr_generic;
>
> - if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die)
> - return;
> -
> - writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0);
> - writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1);
> -
> /*
> * Reset the NDCR register to a clean state for this particular chip,
> * also clear ND_RUN bit.
> @@ -739,6 +733,12 @@ static void marvell_nfc_select_target(struct nand_chip *chip,
> /* Also reset the interrupt status register */
> marvell_nfc_clear_int(nfc, NDCR_ALL_INT);
>
> + if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die)
> + return;
> +
> + writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0);
> + writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1);
> +
> nfc->selected_chip = chip;
> marvell_nand->selected_die = die_nr;
> }
