Since the migration of the driver to stop using the legacy
->select_chip() hook, there is nothing deselecting the target anymore,
thus the selection is not forced at the next access. Ensure the ND_RUN
bit and the interrupts are always in a clean state.
Cc: Daniel Mack <daniel@xxxxxxxxxx>
Cc: stable@xxxxxxxxxxxxxxx
Fixes: b25251414f6e00 ("mtd: rawnand: marvell: Stop implementing ->select_chip()")
Suggested-by: Boris Brezillon <boris.brezillon@xxxxxxxxxxxxx>
Signed-off-by: Miquel Raynal <miquel.raynal@xxxxxxxxxxx>
---
Changes in v2:
* Also include the reset of the interrupts each time
marvell_nfc_select_target() is called.
drivers/mtd/nand/raw/marvell_nand.c | 12 ++++++------
1 file changed, 6 insertions(+), 6 deletions(-)
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index f38e5c1b87e4..d984538980e2 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -722,12 +722,6 @@ static void marvell_nfc_select_target(struct nand_chip *chip,
struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
u32 ndcr_generic;
- if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die)
- return;
-
- writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0);
- writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1);
-
/*
* Reset the NDCR register to a clean state for this particular chip,
* also clear ND_RUN bit.
@@ -739,6 +733,12 @@ static void marvell_nfc_select_target(struct nand_chip *chip,
/* Also reset the interrupt status register */
marvell_nfc_clear_int(nfc, NDCR_ALL_INT);
+ if (chip == nfc->selected_chip && die_nr == marvell_nand->selected_die)
+ return;
+
+ writel_relaxed(marvell_nand->ndtr0, nfc->regs + NDTR0);
+ writel_relaxed(marvell_nand->ndtr1, nfc->regs + NDTR1);
+
nfc->selected_chip = chip;
marvell_nand->selected_die = die_nr;
}
--
2.19.1
