On 11:55 Wed 23 Oct , Johan Hovold wrote:
> Make sure to honour gpio polarity also at remove so that the backlight
> is actually disabled on boards with active-low enable pin.
>
> Cc: stable@xxxxxxxxxxxxxxx
> Acked-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
> Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
> ---
> drivers/video/backlight/atmel-pwm-bl.c | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c
> index 8aac273..3cb0094 100644
> --- a/drivers/video/backlight/atmel-pwm-bl.c
> +++ b/drivers/video/backlight/atmel-pwm-bl.c
> @@ -205,8 +205,10 @@ static int atmel_pwm_bl_remove(struct platform_device *pdev)
> {
> struct atmel_pwm_bl *pwmbl = platform_get_drvdata(pdev);
>
> - if (pwmbl->gpio_on != -1)
> - gpio_set_value(pwmbl->gpio_on, 0);
> + if (pwmbl->gpio_on != -1) {
here we need to use gpio_is_valid
> + gpio_set_value(pwmbl->gpio_on,
> + 0 ^ pwmbl->pdata->on_active_low);
> + }
> pwm_channel_disable(&pwmbl->pwmc);
> pwm_channel_free(&pwmbl->pwmc);
>
> --
> 1.8.4
>
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html