Make sure to honour gpio polarity also at remove so that the backlight
is actually disabled on boards with active-low enable pin.
Cc: stable@xxxxxxxxxxxxxxx
Acked-by: Jingoo Han <jg1.han@xxxxxxxxxxx>
Signed-off-by: Johan Hovold <jhovold@xxxxxxxxx>
---
drivers/video/backlight/atmel-pwm-bl.c | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/drivers/video/backlight/atmel-pwm-bl.c b/drivers/video/backlight/atmel-pwm-bl.c
index 8aac273..3cb0094 100644
--- a/drivers/video/backlight/atmel-pwm-bl.c
+++ b/drivers/video/backlight/atmel-pwm-bl.c
@@ -205,8 +205,10 @@ static int atmel_pwm_bl_remove(struct platform_device *pdev)
{
struct atmel_pwm_bl *pwmbl = platform_get_drvdata(pdev);
- if (pwmbl->gpio_on != -1)
- gpio_set_value(pwmbl->gpio_on, 0);
+ if (pwmbl->gpio_on != -1) {
+ gpio_set_value(pwmbl->gpio_on,
+ 0 ^ pwmbl->pdata->on_active_low);
+ }
pwm_channel_disable(&pwmbl->pwmc);
pwm_channel_free(&pwmbl->pwmc);
--
1.8.4
--
To unsubscribe from this list: send the line "unsubscribe stable" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html